Part number 03CFH7
Price: $37.80 USD
Dell PowerEdge R640 R740 NvDIMM Battery Backup Module w/ Cables & Bracket
Configure a complete server with live pricing
First, try removing the CMOS battery for a few minutes to reset the BIOS to its default settings. Ensure that all necessary connections are secure and check the status LEDs on the mainboard to determine if the server is ready to boot. If the issue persists, further hardware diagnostics may be needed. [community thread]
A detailed list of supported processors for the R640 can be found in the technical guide provided by Dell. If you have questions about specific processors not listed, consider reaching out to customer support for assistance. [community thread]
Yes, the DXD9H hard drive tray caddy is compatible with the PowerEdge R360 server, as it is part of the 16th generation of PowerEdge servers. [community thread]
The required power cable for the NVIDIA Tesla V100 32GB in a PowerEdge R740 varies based on the specific GPU configuration. It is recommended to consult with the sales department or refer to the manufacturer's documentation for the appropriate riser and power kit details. [community thread]
The issue may arise from differences in memory rank, firmware, or PCB revisions between the original and new DIMMs, even if the part numbers match. To troubleshoot, try booting with one module from each set in different CPU slots, and consider updating the BIOS and iDRAC firmware. If problems persist, you may need to return the new modules for ones that match the original revision. [community thread]