Dell 6KK42 for Dell T640 Server Fan Group GPU Upgrade Fan Kit

Part number 06KK42

Price: $350.00 USD

6KK42 for Dell T640 Server Fan Group GPU Upgrade Fan Kit

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What should I do if my Dell T640 server shows a memory error after CPU installation?

If you encounter a memory error after changing CPUs, first ensure that the memory modules are correctly seated and populated in the appropriate slots. Check for any bent pins on the CPU socket, as this could indicate a problem. If issues persist, consider isolating the components to determine if the memory or CPU is faulty. [community thread]

What could cause my T640 server to restart and burn out an H100 GPU?

The T640 server is not compatible with H100 GPUs due to its insufficient power capacity and PCIe generation limitations. The server can only support GPUs with a maximum power consumption of 300W, while the H100 requires at least 350W and is designed for Gen 5 PCIe, which the T640 does not support. [community thread]

Is it safe to rollback the iDRAC firmware on a T640 from version 6.10.30.20 to 3.21.21.21?

Rolling back directly to version 3.21.21.21 from 6.10.30.20 is not recommended due to compatibility issues. It is advisable to downgrade incrementally through several intermediate versions to ensure stability. [community thread]

What do the blinking DS5 and DS6 LEDs indicate on a Dell EMC T640 server that won't power on?

The blinking DS5 and DS6 LEDs typically suggest a hardware issue. To troubleshoot, ensure that the server has the minimum configuration required to POST, which includes one CPU in socket 1, one memory module in socket A1, and at least one power supply unit. [community thread]

What should I do if my Dell T640 server won't power on and the motherboard LEDs indicate a specific status?

The LED pattern suggests a potential 5V BP1 failure. Start by draining flea power by disconnecting all cables and holding the power button for 20 seconds, then wait for 3 minutes. After that, reseat the backplane cable connections and check for any damage, then attempt to power on the server with one power supply connected. [community thread]