Dell R6415,R6515 PCIe Riser 2 Blank Filler

Part number 07G30P

Price: $77.00 USD

Dell R6415,R6515 PCIe Riser 2 Blank Filler

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

Why does the iDRAC display CPU speed in MT/s instead of MHz or GHz on my server?

This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]

What is the correct part number for the H740P Mini Mono card for the R6515 server?

The part number GP6RN is confirmed to be valid for both the R6515 and R6415 servers. [community thread]

What are the part numbers for the PCIe risers in the Power Edge R6515?

The R6515 uses two different PCIe risers: the left riser is part number 6KKNH and the right riser is part number W53WP. For additional purchasing information, please reach out to a sales representative or authorized reseller. [community thread]

What is the recommended upgrade path for the iDRAC and BIOS on PowerEdge R6515 and R6615 servers?

For both servers, it is advisable to update the iDRAC firmware first, followed by the BIOS. Ensure to check the specific firmware requirements on the manufacturer's driver page, and aim to make one major version jump at a time to avoid compatibility issues. Always perform updates during low-load periods and create backups beforehand. [community thread]

Can I mix 3200 MT/s and 2933 MT/s RAM in a Dell PowerEdge R6515 server?

Yes, you can mix RAM speeds, but the system will automatically adjust the speed of all installed DIMMs to the lowest speed, which in this case would be 2933 MT/s. It is advisable to use identical DIMMs for optimal performance, so sourcing the same original parts is recommended. [community thread]