Part number 0CGRHD
Price: $77.00 USD
DELL HEATSINK FOR DELL EMC POWEREDGE R6515 / R7515 - SCREW DOWN TYPE 52 FINS
Configure a complete server with live pricing
This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]
To address a POST error on your PowerEdge R7515, ensure that the firmware is updated to the latest version and run the built-in hardware diagnostics by booting into the LifeCycle Controller. Take note of any errors that arise during the diagnostics for further investigation. [community thread]
The part number GP6RN is confirmed to be valid for both the R6515 and R6415 servers. [community thread]
The R6515 uses two different PCIe risers: the left riser is part number 6KKNH and the right riser is part number W53WP. For additional purchasing information, please reach out to a sales representative or authorized reseller. [community thread]
For both servers, it is advisable to update the iDRAC firmware first, followed by the BIOS. Ensure to check the specific firmware requirements on the manufacturer's driver page, and aim to make one major version jump at a time to avoid compatibility issues. Always perform updates during low-load periods and create backups beforehand. [community thread]