Dell PowerEdge T440 T640 H740 H740P H730P Server SAS SATA

Part number 0XRFV4 · also known as XRFV4

Price: $77.00 USD

Dell PowerEdge T440 T640 H740 H740P H730P Server SAS SATA Raid Cable XRFV4

Specifications

component typecable

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What could cause my T640 server to restart and burn out an H100 GPU?

The T640 server is not compatible with H100 GPUs due to its insufficient power capacity and PCIe generation limitations. The server can only support GPUs with a maximum power consumption of 300W, while the H100 requires at least 350W and is designed for Gen 5 PCIe, which the T640 does not support. [community thread]

What could cause an oscillating noise in a PowerEdge T440 server after a power supply replacement?

The oscillating noise may be due to a faulty power supply, even if it appears to be functioning. To accurately diagnose the issue, consider recording the sound and sharing it for further assistance. [community thread]

What should I do if my PowerEdge T440 freezes after installing a Radeon RX6600 graphics card?

The Radeon RX6600 is not officially certified for use with the PowerEdge T440, which may lead to stability issues. It is advisable to use a Dell-certified GPU for optimal performance and compatibility, as non-certified components can result in unpredictable behavior. [community thread]

How can I add more drives to my Dell T430 or T440 servers if there is no front space available?

The Dell T430 and T440 servers have fixed backplane configurations that cannot be changed after purchase, limiting the number of drives you can add. If you have the x8 SAS/SATA backplane, you cannot add more drives; however, you could consider upgrading to larger capacity drives and creating a new array. [community thread]

What should I do if my Dell T640 server won't power on and the motherboard LEDs indicate a specific status?

The LED pattern suggests a potential 5V BP1 failure. Start by draining flea power by disconnecting all cables and holding the power button for 20 seconds, then wait for 3 minutes. After that, reseat the backplane cable connections and check for any damage, then attempt to power on the server with one power supply connected. [community thread]