Part number 100-000000529 · also known as 02YH878 · 100-000000529 · EPYC 7313 · SYNTHETIC:amd:amd-epyc-7313 · SYNTHETIC:amd:epyc-7313
Price: $541.50 USD
AMD EPYC 7313 16 Cores (32T) 3.0GHz, 155W
| cores | 16 |
|---|---|
| family | AMD EPYC |
| socket | SP3 |
| threads | 32 |
| cache mb | 128 |
| tdp watts | 155 |
| cpu family | EPYC |
| generation | 3rd Gen Milan |
| mem channels | 8 |
| multi vendor | True |
| sourcing pns | ['02YH878', '100-000000529', 'EPYC 7313', 'SYNTHETIC:amd:amd-epyc-7313', 'SYNTHETIC:amd:epyc-7313'] |
| base clock ghz | 3 |
| boost clock ghz | 3.7 |
| max mem speed mhz | 3200 |
Configure a complete server with live pricing
This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]
The absence of the memory remap option in the BIOS/UEFI settings for the DL385 Gen10, which uses AMD EPYC processors, is normal as memory remapping is typically managed automatically by the processor architecture rather than being a configurable setting. For further details, consult the server's quick specifications. [community thread]
If your server's memory is operating at a lower frequency, it may be due to the presence of memory modules with different specifications. Ensure that all installed memory modules are of the same speed; if any module has a lower frequency, it will cause the entire system to operate at that lower speed. [community thread]
To successfully install an operating system on a Dell PowerEdge R6525, it is essential to use Dell-certified components, including a compatible CPU, RAM, and a recommended 1400W power supply unit. Non-standard or third-party parts may lead to compatibility issues and prevent the system from booting or installing the OS correctly. Ensure all components are properly connected and configured in the BIOS. [community thread]
The DL385 Gen10 8LFF configuration is limited to 2 SFF cages due to design specifications. If you are encountering issues with the OCA tool, it may not be functioning correctly, as the system supports only 2 SFF rear drive boxes. [community thread]