AMD EPYC 9755

Part number 100-000001691 · also known as EPYC 9755 · SYNTHETIC:amd:amd-epyc-9755

Price: $6,298.60 USD

AMD 9755 — 128-core / 2.7GHz base / 4.1GHz Turbo / 500W / 5th Gen Turin / SP5

Specifications

cores128
familyAMD EPYC
socketSP5
threads256
cache mb512
pcie gen5
tdp watts500
cpu familyEPYC
generation5th Gen Turin
pcie lanes128
cache l3 mb512.0
multi vendorTrue
sourcing pns['SYNTHETIC:amd:amd-epyc-9755']
max turbo ghz4.1
base clock ghz2.7
boost clock ghz4.1
supported memory['DDR5']
max mem speed mhz6000
max memory speed mhz6000

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

Can the Dell PowerEdge R7725 server be configured with only one CPU and two RAM modules?

The PowerEdge R7725 server requires two processors, as it is designed for dual socket operation. Therefore, it is not possible to order it with just one CPU. [community thread]

Why is the memory remap option missing in the DL385 Gen10 server after a memory replacement?

The absence of the memory remap option in the BIOS/UEFI settings for the DL385 Gen10, which uses AMD EPYC processors, is normal as memory remapping is typically managed automatically by the processor architecture rather than being a configurable setting. For further details, consult the server's quick specifications. [community thread]

Why is my HP ProLiant DL385 Gen10 running memory at a lower frequency than expected?

If your server's memory is operating at a lower frequency, it may be due to the presence of memory modules with different specifications. Ensure that all installed memory modules are of the same speed; if any module has a lower frequency, it will cause the entire system to operate at that lower speed. [community thread]

Can I use 3 rear SFF cages with the DL385 Gen10 8LFF configuration?

The DL385 Gen10 8LFF configuration is limited to 2 SFF cages due to design specifications. If you are encountering issues with the OCA tool, it may not be functioning correctly, as the system supports only 2 SFF rear drive boxes. [community thread]

Can I install two full-length GPUs and one half-length capture card in a DL385 Gen10 server?

The DL385 Gen10 server typically comes with a riser that has one full-length and two half-length slots. To accommodate two full-length GPUs, you may need to explore additional riser options or configurations, as the standard setup may not support this arrangement with a single CPU. [community thread]