Dell R650/R650xs/R6525/R660xs 6 Drive Slot Cover Filler

Part number 3T0PH

Price: $57.40 USD

Dell R650/R650xs/R6525/R660xs 6 Drive Slot Cover Filler Blank

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What do the LED codes on the R660 motherboard indicate when the server fails to boot?

The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]

How can I disable the liquid cooling setting on a PowerEdge server?

To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]

What cables are needed for an H755N Front NVMe RAID card in a PowerEdge R650xs server?

The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]

How can I remove a server that has been installed upside down in the rack?

To address a server that is installed upside down, first remove the side door of the rack to inspect the latch mechanism for any damage or bending. If the latch is obstructed, it may be necessary to contact technical support for further assistance, as removing the server could result in damage. [community thread]

What is the part number for the riser card compatible with the R660 server for a full height SAS card?

The appropriate riser card for the R660 server that supports a full height SAS card is part number 540-BFFR. This riser configuration includes 2x16 FH slots and is designed for customer installation. [community thread]