Dell Fan PowerEdge R650 R6525 R660 R6625 High Performance Gold

Part number 5JGXP

Request a quote

Fan PowerEdge R650 R6525 R660 R6625 High Performance Gold Fan

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What do the LED codes on the R660 motherboard indicate when the server fails to boot?

The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]

How can I disable the liquid cooling setting on a PowerEdge server?

To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]

Is it safe to update the BIOS and iDRAC firmware on a PowerEdge R6525 server, and which should be updated first?

It is generally safe to update both the BIOS and iDRAC firmware to the latest versions. It is recommended to update the iDRAC firmware before proceeding with the BIOS update. [community thread]

Can the Dell PowerEdge R650 be configured with 10 NVMe U.3/U.2 drives and 2 SATA drives without a RAID controller?

Yes, the Dell PowerEdge R650 can support this configuration using the S150 PERC software controller, which does not require a hardware RAID card. For software RAID, ensure that you are using compatible Dell NVMe drives and check the specifications for any additional requirements. [community thread]

What cables are needed when replacing the backplane and controller in a Dell R650 server?

When replacing the backplane and controller in a Dell R650 server, it's important to note that the necessary cables may not be included with the new components. It is recommended to contact local support or raise a ticket to ensure you receive the correct cables for your setup. [community thread]