Dell Heatsink Dell Poweredge R6515 R6525 R7525 (<180W) Standard

Part number FWYRH

Request a quote

Heatsink Dell Poweredge R6515 R6525 R7525 (<180W) Standard Performance 1U

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What GPUs are compatible with the PowerEdge R7525 and what is the maximum power draw?

For compatible GPUs and recommended slots, consult the technical guide, specifically page 27. The maximum power draw for GPUs is detailed in the table on page 7. [community thread]

Why does the iDRAC display CPU speed in MT/s instead of MHz or GHz on my server?

This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]

What should I do if my Dell R7525 server gets stuck at the IDRAC initializing screen with solid DS0 and DS3 LED lights?

First, ensure that the CPUs and memory modules are properly seated and compatible. Clear the NVRAM by using the onboard jumper or removing the battery to reset the BIOS settings. If the issue persists, it may indicate a fault with the motherboard. [community thread]

What should I do if my PowerEdge R7515 shows a POST error?

To address a POST error on your PowerEdge R7515, ensure that the firmware is updated to the latest version and run the built-in hardware diagnostics by booting into the LifeCycle Controller. Take note of any errors that arise during the diagnostics for further investigation. [community thread]

How can I determine if my Dell R7525 server chassis is OEM or not?

To identify if your R7525 chassis is OEM, check the service tag on the Dell support page. If it is OEM, the support page will explicitly indicate this. [community thread]