Part number GHGTP
Request a quote
Riser Dell PowerEdge R740/R7425 PCI-E 3.0 2x(x8) 1x(x16) Card 1D
| component type | riser |
|---|
Configure a complete server with live pricing
The required power cable for the NVIDIA Tesla V100 32GB in a PowerEdge R740 varies based on the specific GPU configuration. It is recommended to consult with the sales department or refer to the manufacturer's documentation for the appropriate riser and power kit details. [community thread]
Ensure that the GPU is properly powered by installing the necessary power cable (part # 4VPD3) from the motherboard to the GPU. It's recommended to use a complete GPU support kit for the R740 to ensure all components for detection and thermal management are included. Additionally, verify the configuration by testing with only one GPU and checking iDRAC for any power initialization errors. [community thread]
To connect the Nvidia A100-SXM4-40GB GPU in a R760 server, you will need the appropriate power cable. The correct part numbers to look for are 9PVH2 for Riser 4 and CPH58 for Riser 1, but it's advisable to verify compatibility before purchasing. [community thread]
For the Intel Xeon Gold 6134, a standard heat sink rated for up to 165W, such as part number 0F8NV, is suitable. The C6R9H heat sink, which supports up to 125W, may not be adequate for optimal performance. [community thread]
The R740 server is compatible with PCIe 3.0 x16 interfaces, which suggests that the Mellanox MCX416A-CCAT card may work. However, since this specific card is not verified with Dell's part number, compatibility cannot be guaranteed, and using a non-Dell version might lead to increased fan noise. [community thread]