Part number JYP2T
Request a quote
Dell 2TB 7200RPM SATA 6Gbps 512n 3.5 Inch Hard Drive for PowerEdge R740xd -
| interface | SATA |
|---|---|
| drive type | hdd |
| capacity gb | 2000 |
| form factor | 3.5" |
Configure a complete server with live pricing
The 0W0DNK NVMe expanders are not compatible with the 0P1MJ3 backplane. You should use the 0235NK expanders, as they are specifically designed for this configuration, allowing for optimal performance with 12 NVMe drives. [community thread]
To resolve the boot issue, revert the PERC controller back to RAID mode via iDRAC and perform a cold power cycle for 30 to 60 seconds. After rebooting, access the System Setup to delete any old UEFI boot entries, clear all configurations in the PERC settings, and ensure that your BIOS, iDRAC, and PERC firmware are updated before switching back to HBA mode. [community thread]
The Dell R740XD chassis does not support NVMe drives in a 12 + 4 configuration, which means there is no available option to add NVMe capabilities to this server model. [community thread]
Ensure that the PCIe storage card is compatible with the R740xd, as only specific models are validated for this server. Additionally, check the BIOS settings to confirm that the boot mode is correctly configured. [community thread]
Consider using a different riser slot, such as Riser 2 or 3, for your GPU installation. Additionally, ensure you have the necessary GPU enablement kit components to facilitate proper installation. [community thread]