Part number K13YF
Request a quote
Blank Dell PowerEdge G14/R440/R540/R740xd2 Slot OCP 2.0
| component type | mechanical |
|---|
Configure a complete server with live pricing
To address high fan speeds on the Dell R740XD2, ensure you are using a supported operating system, as Flatcar is not officially validated for this server model. Consider switching to a supported OS like Ubuntu or Red Hat, which may allow for better fan control. If you continue to use Flatcar, be aware that Dell does not provide support for issues related to it. [community thread]
For retrofitting the R440 to support NVMe drives, it's advisable to refer to the user manual for accurate cabling instructions. A PCIe extender card may be necessary if utilizing the SAS drive slots, and ensure that the SAS cables are of adequate length to connect to the HBA card. [community thread]
The Dell R440 server with the 4JN2K motherboard can support processors with a thermal design power (TDP) of up to 150 W, including the Xeon 6252, 6428, 6242, and 6240. For other motherboard versions, ensure the CPU has a TDP of less than 140 W for compatibility. [community thread]
To enable NVMe functionality on the Dell R740XD2, you will need the backplane with part number PC8TD, which supports 24 NVMe drives or a combination of SATA and NVMe. Ensure to consult the user guide for proper cabling instructions, as the hardware configurations for R740XD and R740XD2 differ. [community thread]
For the R440 server with a 150W TDP CPU, the recommended heatsinks are part numbers 1CW2J for CPU2 and 994RT for CPU1. It's advisable to verify compatibility with your specific configuration before making a purchase. [community thread]