Part number P77271-B21
Price: $3,498.60 USD
HPE 3.84TB NVMe Gen5 Mainstream Performance Read Intensive E3S EC1 EDSFF SPDM PE1010 SSD
| endurance | RI |
|---|---|
| interface | NVMe |
| drive type | nvme |
| capacity gb | 3840 |
| form factor | E3.S |
| endurance class | RI |
| compat chassis strip at | 2026-05-26T21:08:06Z |
| compat chassis pre mig384 | ['Dell PowerEdge R470', 'Dell PowerEdge R570', 'Dell PowerEdge R670', 'Dell PowerEdge R6725', 'Dell PowerEdge R770', 'Dell PowerEdge R770AP', 'Dell PowerEdge R7725', 'Dell PowerEdge R7725xd', 'Dell PowerEdge XE7740', 'Dell PowerEdge XE7745', 'Dell PowerEdge XE9785', 'HPE ProLiant DL380 Gen11', 'HPE ProLiant DL380 Gen12', 'HPE ProLiant DL580 Gen12', 'Lenovo ThinkSystem SR635 V3', 'Lenovo ThinkSystem SR670 V2', 'PowerEdge R470', 'PowerEdge R570', 'PowerEdge R670', 'PowerEdge R6725', 'PowerEdge R770', 'PowerEdge R770AP', 'PowerEdge R7725', 'PowerEdge R7725xd', 'PowerEdge XE7740', 'PowerEdge XE7745', 'PowerEdge XE9785', 'ProLiant DL380 Gen11', 'ProLiant DL380 Gen12', 'ProLiant DL580 Gen12', 'ThinkSystem SR635 V3', 'ThinkSystem SR670 V2', 'dl380 gen11', 'dl380 gen12', 'dl580 gen12'] |
Configure a complete server with live pricing
To fix the 'Base System Device' issue, download and install the Intel chipset driver from the HPE Support Center for your ProLiant DL380 Gen11. Alternatively, you can use the HPE Service Pack for ProLiant (SPP) to automatically install the necessary drivers. After installation, reboot the server and check Device Manager to ensure the devices are correctly identified. [community thread]
The freezing issue is likely due to a mismatch between hardware, firmware, and drivers. To resolve this, ensure all firmware is updated to the latest versions, install the HPE SUSE Linux Driver Pack for SLES 15 SP7, and check system logs for any lockup errors. Additionally, apply any necessary SUSE kernel patches for SP7. [community thread]
RAID 10 volumes on MR controllers cannot be expanded by adding additional disks. To increase capacity, you will need to back up your data, delete the existing array, create a new array with all drives, and then restore your backup. [community thread]
The NS204i-u boot device requires a specific bracket and a cable kit for installation, which are not included with the device itself. It is advisable to consult the HPE ProLiant DL380 Gen11 Server User Guide for detailed installation instructions and to verify the necessary parts with an HPE reseller. [community thread]
To install two L40S GPUs, ensure your server is the correct variant with the appropriate risers, power cables, and cooling. Verify that the secondary and tertiary risers are compatible with dual GPU setups and check for any physical obstructions in the chassis that may hinder installation. If issues persist, consult HPE Support for a detailed installation guide specific to your chassis model. [community thread]