Dell Riser 1 Card Assembly for Dell Emc PowerEdge R6415

Part number VDK70 · also known as RISER1 · W53WP

Request a quote

DELL RISER 1 CARD ASSEMBLY FOR DELL EMC POWEREDGE R6415 / R6515 - RISER1 BOARD SLOT 1 PCI-E 3.0 X16 - NO CAGE / BRACKET ( PN: W53WP )

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

Why does the iDRAC display CPU speed in MT/s instead of MHz or GHz on my server?

This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]

What should I do if my PowerEdge R7515 shows a POST error?

To address a POST error on your PowerEdge R7515, ensure that the firmware is updated to the latest version and run the built-in hardware diagnostics by booting into the LifeCycle Controller. Take note of any errors that arise during the diagnostics for further investigation. [community thread]

What is the correct part number for the H740P Mini Mono card for the R6515 server?

The part number GP6RN is confirmed to be valid for both the R6515 and R6415 servers. [community thread]

What are the part numbers for the PCIe risers in the Power Edge R6515?

The R6515 uses two different PCIe risers: the left riser is part number 6KKNH and the right riser is part number W53WP. For additional purchasing information, please reach out to a sales representative or authorized reseller. [community thread]

What is the recommended upgrade path for the iDRAC and BIOS on PowerEdge R6515 and R6615 servers?

For both servers, it is advisable to update the iDRAC firmware first, followed by the BIOS. Ensure to check the specific firmware requirements on the manufacturer's driver page, and aim to make one major version jump at a time to avoid compatibility issues. Always perform updates during low-load periods and create backups beforehand. [community thread]