Part number W23H8
Request a quote
DELL MOTHERBOARD FOR DELL EMC POWEREDGE R640 - SYSTEM BOARD ( 2 ) TWO CPU SOCKETS ( 24 ) TWENTY FOUR DIMM SLOTS
| component type | motherboard |
|---|
Configure a complete server with live pricing
To turn off the default fan speed response for a third-party PCI card, use the command 'racadm set system.thermalsettings.ThirdPartyPCIFanResponse 0'. If you encounter an 'Invalid object specified' error, ensure that your iDRAC firmware is up to date and that you are using the correct command syntax. [community thread]
If you experience memory errors after a CPU swap, first try reseating the CPUs and removing power for at least 24 hours. If the issue persists, inspect the memory slot for any visible damage and consider testing with the original CPUs. If problems continue, it may indicate a motherboard issue. [community thread]
For the R330 server, you can use the ReadyRails 1U Static Rails (SKU: 770-BBIC) or the ReadyRails Sliding Rails without a cable management arm (SKU: 770-BBJS). Additionally, a 1U Cable Management Arm (SKU: 770-BBIE) is available for cable organization. [community thread]
The R640 supports a mixed configuration, but the last four slots are designated solely for NVMe drives, meaning SAS drives cannot be installed there. Additionally, there is no hardware NVMe RAID available for this server generation. [community thread]
For the Intel Xeon Gold 6134, a standard heat sink rated for up to 165W, such as part number 0F8NV, is suitable. The C6R9H heat sink, which supports up to 125W, may not be adequate for optimal performance. [community thread]