Request a quote — built to order from tested, warrantied stock.
The Dell PowerEdge R350 is a refurbished 1U Rack server (15G) for the Intel Xeon E-2300 series, DDR4 · up to 128 GB · 4 DIMM slots · up to 3200 MT/s · ECC. Drive layouts: 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: general.
| Form factor | 1U Rack |
|---|---|
| Generation | 15G |
| CPU | 1 socket(s) · Intel Xeon E-2300 series · LGA1200 · up to 8 cores per CPU |
| Memory | DDR4 · up to 128 GB · 4 DIMM slots · up to 3200 MT/s · ECC |
| Drive bays | 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA |
| Storage controllers | PERC H355, PERC H355f, PERC H345, PERC H345f, H755, H755f · boot: Internal Dual SD Module, USB, BOSS-S2 (HWRAID 2 x M.2 SSDs) · M.2 boot |
| PCIe | Gen 4.0 · 3 slots · 1× x16 |
| Networking | 2x 1GbE LOM |
| Power | 600W Platinum · redundant · hot-swap |
| Management | iDRAC9 · iDRAC9 Basic |
| Cooling | ASHRAE A4 · hot-swap fans |
| Dimensions | 42.8 × 482 × 585.3 mm |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
Ensure that all installed DIMMs are DDR4 and compatible with the server. Check that the memory modules are correctly seated and that a processor is installed, as memory sockets can only be populated in this case. For detailed installation guidelines, refer to the official documentation. [community thread]
The required screws for the PERC card tray are M3 x 3.6mm. You will need a total of four screws for proper installation. [community thread]
DSU does not support updating the System CPLD on PowerEdge servers. To perform the update, you can use the iDRAC web interface by selecting the downloaded CPLD update package for installation during the next reboot, or use the Lifecycle Controller by booting into it and applying the update from an FTP, network, or USB source. [community thread]