Request a quote — built to order from tested, warrantied stock.
The Dell PowerEdge R360 is a refurbished 1U Rack server (16G) for the Intel Xeon 6300 series, Intel Xeon E-2400 series, Intel Pentium G7400/G7400T, DDR5 · up to 128 GB · 4 DIMM slots · up to 4800 MT/s · ECC. Drive layouts: 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: general.
| Form factor | 1U Rack |
|---|---|
| Generation | 16G |
| CPU | 1 socket(s) · Intel Xeon 6300 series, Intel Xeon E-2400 series, Intel Pentium G7400/G7400T · LGA1700 · up to 8 cores per CPU · max 95 W TDP |
| Memory | DDR5 · up to 128 GB · 4 DIMM slots · up to 4800 MT/s · ECC |
| Drive bays | 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA |
| Storage controllers | HBA355i Adpt, PERC H355 Adpt, PERC H755 Adpt, HBA355i front, H355 front, H755 front · boot: Internal USB 3.0, BOSS-N1 (HWRAID 2 x M.2 SSDs, USB) · M.2 boot |
| PCIe | Gen 4.0 · 3 slots · 1× x16 |
| Networking | 2x 1GbE LOM · OCP 3.0 slot |
| GPU | up to 1 GPUs |
| Power | 600W Platinum, 700W Titanium · redundant · hot-swap |
| Management | iDRAC9 · iDRAC9 Basic |
| Cooling | ASHRAE A4 |
| Dimensions | 42.8 × 482.0 × 585.3 mm |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
Yes, the DXD9H hard drive tray caddy is compatible with the PowerEdge R360 server, as it is part of the 16th generation of PowerEdge servers. [community thread]
If your R360 server remains excessively loud despite configuring the fan settings to 'Minimum Power' and 'Off', it may indicate a deeper issue such as a faulty temperature sensor, a defective motherboard, or a firmware bug affecting thermal control. In such cases, professional support may be necessary to diagnose and resolve the problem. [community thread]
The R360 server does not officially support NVMe SSDs with the H755 controller, as the only validated NVMe option is the BOSS-N1, which is a specific configuration. The server primarily supports 2.5-inch and 3.5-inch SAS and SATA drives. [community thread]
Dell has not officially validated the CP-104EL-A-DB9M board for use with the R360 server, so compatibility is uncertain. You may want to check the server's riser and slot specifications in the installation manual to see if it fits. [community thread]