Request a quote — built to order from tested, warrantied stock.
The Dell PowerEdge R450 is a refurbished 1U Rack server (15G) for the 3rd Gen Intel Xeon Scalable, DDR4 · up to 1024 GB · 16 DIMM slots · up to 3200 MT/s · ECC. Drive layouts: 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: virtualization, general.
| Form factor | 1U Rack |
|---|---|
| Generation | 15G |
| CPU | 2 socket(s) · 3rd Gen Intel Xeon Scalable · LGA4189 · up to 24 cores per CPU · max 185 W TDP |
| Memory | DDR4 · up to 1024 GB · 16 DIMM slots · up to 3200 MT/s · ECC |
| Drive bays | 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA |
| Storage controllers | PERC H345, PERC H355, HBA355i, PERC H745, PERC H755, S150 · boot: Internal Dual SD Module, BOSS-S2 (HWRAID 2x M.2 SSDs) · M.2 boot |
| PCIe | Gen 4.0 · 2 slots · 2× x16 |
| Networking | 2x 1GbE LOM · OCP 3.0 slot |
| GPU | up to 3 GPUs |
| Power | 1100W, 800W Platinum, 600W Platinum, 700W Titanium, 1100W Titanium · redundant · hot-swap |
| Management | iDRAC9 · iDRAC9 Basic |
| Cooling | ASHRAE A4 |
| Dimensions | 42.8 × 482 × 748.79 mm |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]
To address this issue, ensure that your DIMMs are properly populated according to the server's memory guidelines. Check the BIOS version and verify the specifications of the installed DIMMs, as only certain capacities are supported for 2R DIMMs. [community thread]
Discrepancies in IPMI sensor data among identical R450 servers can occur due to variations in the tools used for monitoring. Using a more reliable command-line tool like 'ipmitool' may provide consistent and comprehensive sensor information across all servers. [community thread]
Yes, it is possible to mix different RAM sizes in the PowerEdge R450, provided that all modules are of the same type, specifically Registered DIMMs (RDIMMs). For optimal performance, it's recommended to arrange the RAM modules evenly across the channels and ensure they operate at the same speed. [community thread]
Check the iDRAC's Lifecycle logs for any indications of issues. Additionally, consider whether there are power fluctuations in your environment, as these can cause unexpected shutdowns. [community thread]