Request a quote — built to order from tested, warrantied stock.
The Dell PowerEdge R6615 is a refurbished 1U Rack server (16G) for the AMD EPYC 4th Generation 9004 series, DDR5 · up to 3076 GB · 12 DIMM slots · up to 5600 MT/s · 12 channels per CPU. Drive layouts: 4x 3.5-inch SAS/SATA; 4x 3.5-inch SAS/SATA with Rear 2x E3.S G5x4; 8x 2.5-inch NVMe; 8x 2.5-inch NVMe RAID (with FPERC11 N); 8x 2.5-inch NVMe RAID (with FPERC12); 10x 2.5-inch SAS4/SATA RAID (with FPERC11). Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: storage, general.
| Form factor | 1U Rack |
|---|---|
| Generation | 16G |
| CPU | 1 socket(s) · AMD EPYC 4th Generation 9004 series · SP5 · up to 128 cores per CPU · max 400 W TDP |
| Memory | DDR5 · up to 3076 GB · 12 DIMM slots · up to 5600 MT/s · 12 channels per CPU |
| Drive bays | 4x 3.5-inch SAS/SATA; 4x 3.5-inch SAS/SATA with Rear 2x E3.S G5x4; 8x 2.5-inch NVMe; 8x 2.5-inch NVMe RAID (with FPERC11 N); 8x 2.5-inch NVMe RAID (with FPERC12); 10x 2.5-inch SAS4/SATA RAID (with FPERC11) |
| Storage controllers | PERC H965i, PERC H755N, PERC H755, PERC H355, HBA355i, HBA465i · boot: BOSS-N1 (HWRAID 2x M.2 NVMe SSDs) · M.2 boot |
| PCIe | Gen 5.0 · 3 slots |
| Networking | 2x 1GbE LOM · OCP 3.0 slot |
| GPU | up to 3 GPUs |
| Power | 700W Titanium, 800W Platinum, 1100W Titanium, 1400W Platinum, 1400W Titanium, 1800W Titanium, 2400W Platinum, 1100W, 1100W, 700W Titanium, 800W Platinum, 1100W Titanium, 1400W Platinum, 1400W Titanium, 1800W Titanium · redundant · hot-swap |
| Management | iDRAC9 · iDRAC9 Express |
| Cooling | ASHRAE A4 · hot-swap fans |
| Dimensions | 42.8 × 482 × 787.05 mm · 20.2 kg |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
No, the H755 SAS controller is not compatible with NVMe drives, even if the backplane supports them. You will need to use a dedicated NVMe controller for this configuration. [community thread]
The R6515 uses two different PCIe risers: the left riser is part number 6KKNH and the right riser is part number W53WP. For additional purchasing information, please reach out to a sales representative or authorized reseller. [community thread]
If the firmware is listed as compatible, it should work with the PERC H965i Front RAID controller. However, be aware that installation on unsupported servers may be challenging. [community thread]
The failure to update the DPU firmware is likely due to an issue with the update catalog, which incorrectly identifies the package as applicable to your system. This problem should be resolved in the next catalog release, so ensure you are using the latest version. [community thread]
The RAID 10 option may not be visible due to configuration settings or limitations in the sales tool. It is advisable to reach out to sales support for potential overrides or further assistance, as the H755 controller does support RAID 10. [community thread]
For both servers, it is advisable to update the iDRAC firmware first, followed by the BIOS. Ensure to check the specific firmware requirements on the manufacturer's driver page, and aim to make one major version jump at a time to avoid compatibility issues. Always perform updates during low-load periods and create backups beforehand. [community thread]