Refurbished Dell PowerEdge R760

Request a quote — built to order from tested, warrantied stock.

The Dell PowerEdge R760 is a refurbished 2U Rack server (16G) for the 4th Gen Intel Xeon Scalable, DDR5 · up to 8192 GB · 32 DIMM slots · up to 5600 MT/s · 8 channels per CPU. Drive layouts: 12x 3.5-inch SAS/SATA; 12x 3.5-inch SAS/SATA + 2x 2.5-inch SAS/SATA (rear); 12x 3.5-inch SAS/SATA + 2x 2.5-inch NVMe (rear); 12x 3.5-inch SAS/SATA + 4x 2.5-inch SAS/SATA (rear); 12x 3.5-inch SAS/SATA + 4x 2.5-inch NVMe (rear); 8x 2.5-inch NVMe. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.

Best for: storage, virtualization, database.

Configure this server online

Specifications

Form factor2U Rack
Generation16G
CPU2 socket(s) · 4th Gen Intel Xeon Scalable · LGA4677 · up to 64 cores per CPU · max 350 W TDP
MemoryDDR5 · up to 8192 GB · 32 DIMM slots · up to 5600 MT/s · 8 channels per CPU
Drive bays12x 3.5-inch SAS/SATA; 12x 3.5-inch SAS/SATA + 2x 2.5-inch SAS/SATA (rear); 12x 3.5-inch SAS/SATA + 2x 2.5-inch NVMe (rear); 12x 3.5-inch SAS/SATA + 4x 2.5-inch SAS/SATA (rear); 12x 3.5-inch SAS/SATA + 4x 2.5-inch NVMe (rear); 8x 2.5-inch NVMe
Storage controllersPERC H965i, PERC H755, PERC H755N, PERC H355, HBA355i, HBA465i · boot: BOSS-N1 — HWRAID 2 x M.2 NVMe SSD, USB · M.2 boot
PCIeGen 5.0 · 8 slots
NetworkingOCP 3.0 slot
GPUup to 6 GPUs · 2 double-width
Power700W Titanium, 800W Platinum, 1100W Titanium, 1400W Platinum, 1400W Titanium, 1800W Titanium, 2400W Platinum, 2800W Titanium, 1100W, 3200W Titanium · redundant · hot-swap
ManagementiDRAC9 · iDRAC9 Express
CoolingASHRAE A4 · hot-swap fans
Dimensions86.8 × 482 × 736.29 mm · 36.1 kg

Chassis configurations

Typical refurbished configuration

Real parts from our catalog for this chassis, priced from live market listings and vendor offers:

Processors

Memory

Drives

Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.

Compare with similar Dell servers

Frequently asked questions

What does the error 'CPU 1 VCCIO PG Voltage Is Outside of Range' mean on a PowerEdge R760?

This error is typically associated with issues in the motherboard's voltage regulation or CPU seating. To troubleshoot, perform a power drain, check for firmware updates, and inspect the CPU for any bent pins or debris. If the problem continues, the motherboard may need to be examined. [community thread]

Why does the iDRAC display CPU speed in MT/s instead of MHz or GHz on my server?

This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]

Can the R760 server support two Nvidia L40 video cards?

Yes, the R760 server with dual CPUs can accommodate two Nvidia L40 GPUs, as they are double-width and within the power specifications. Ensure you have a power supply of at least 1600W and the appropriate GPU riser kit, power cables, and cooling components for optimal performance. [community thread]

How can I disable the liquid cooling setting on a PowerEdge server?

To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]

What power cable is needed to install a Nvidia A100-SXM4-40GB in a R760 server?

To connect the Nvidia A100-SXM4-40GB GPU in a R760 server, you will need the appropriate power cable. The correct part numbers to look for are 9PVH2 for Riser 4 and CPH58 for Riser 1, but it's advisable to verify compatibility before purchasing. [community thread]

What are the limitations for using a single H100NVL GPU in the R760XA server?

The R760XA server requires a minimum of two H100NVL GPUs for proper operation, as it is designed for optimized GPU support. Installing a single GPU may lead to boot errors and complications during hardware upgrades. It is advisable to consult with a sales engineer to ensure the configuration meets your needs. [community thread]

What should I do if my Dell PowerEdge R760 displays a Fatal IO error?

This error indicates a malfunctioning component at bus 126 device 0 function 3. To pinpoint the issue, access the iDRAC interface, go to System > Hardware Inventory, and check the PCIe Devices section for details on the problematic component. Additionally, reviewing the iDRAC log may provide further insights into the device's status. [community thread]

What should I do if I encounter a memory initialization error on my R760 server?

If you receive a memory initialization error, first try replacing the DIMM in the specified slot, as it may be faulty. Additionally, you can test the memory by swapping it with another slot to determine if the issue lies with the memory module or the slot itself. [community thread]