Request a quote — built to order from tested, warrantied stock.
The Dell PowerEdge R760xa is a refurbished 2U Rack server (16G) for the 4th Gen Intel Xeon Scalable|5th Gen Intel Xeon Scalable, DDR5 · up to 4096 GB · 32 DIMM slots · up to 5600 MT/s · ECC. Drive layouts: 6x 2.5-inch NVMe direct attached (S160); 8x 2.5-inch NVMe RAID; 8x 2.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA, two universal slots; 6x E3.S Gen5 NVMe direct attached (S160). Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: ai.
| Form factor | 2U Rack |
|---|---|
| Generation | 16G |
| CPU | 2 socket(s) · 4th Gen Intel Xeon Scalable|5th Gen Intel Xeon Scalable · LGA4677 · up to 64 cores per CPU · max 350 W TDP |
| Memory | DDR5 · up to 4096 GB · 32 DIMM slots · up to 5600 MT/s · ECC |
| Drive bays | 6x 2.5-inch NVMe direct attached (S160); 8x 2.5-inch NVMe RAID; 8x 2.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA, two universal slots; 6x E3.S Gen5 NVMe direct attached (S160) |
| Storage controllers | PERC H355, PERC H755, PERC H755N, H965i, HBA355i, HBA465i · boot: BOSS-N1 · M.2 boot |
| PCIe | Gen 5.0 · 12 slots · 8× x16 |
| Networking | 2x 1GbE LOM (BCM5720) · OCP 3.0 slot |
| GPU | up to 12 GPUs · 4 double-width |
| Power | 2400W Platinum, 2800W Titanium, 3200W Titanium · redundant · hot-swap |
| Management | iDRAC9 · iDRAC9 Express |
| Cooling | ASHRAE A4 · hot-swap fans |
| Dimensions | 86.8 × 482.0 × 946.73 mm · 27.5 kg |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
The appropriate part number for the 8-pin GPU cable for the A100 GPU in an R760xa server is 191JG, which is the GPU PUCK cable. You can refer to the cabling guide for additional details. [community thread]
The R760XA server requires a minimum of two H100NVL GPUs for proper operation, as it is designed for optimized GPU support. Installing a single GPU may lead to boot errors and complications during hardware upgrades. It is advisable to consult with a sales engineer to ensure the configuration meets your needs. [community thread]
The R760xa's architecture does not support PXB communication between the GPUs in slots 36 and 38, as they are connected to separate CPU root ports. This configuration results in NODE communication instead of the desired PXB, since there is no available riser that allows both GPUs to connect through the same PCIe switch. [community thread]
To install two NVIDIA H100 GPUs in a DELL PowerEdge R760xa, ensure you have the appropriate riser configuration and install the GPUs in slots 31, 33, 36, or 38. You will also need power cables, specifically part number 470-BCTG, for both the left and right connections. For further assistance, consider reaching out to server support after gathering the necessary components. [community thread]
To install 4 GPUs in a PER760XA server, you will require a GPU enablement kit (part number 470-BCTG) along with several specific cables: 0T07W (Left GPU cable), 191JG (CPU GPU PUCK cable - Black), 7V563 (Right GPU cable), M88NN (GPU PUCK cable - Gray, 12 Pin), XYDKX (GPU PUCK cable - Black, 12 Pin), and YHF7N (CPU GPU PUCK cable - Gray). Ensure you have all these cables for proper installation. [community thread]