Refurbished Dell PowerEdge R7615

Request a quote — built to order from tested, warrantied stock.

The Dell PowerEdge R7615 is a refurbished 2U Rack server (16G) for the 4th Generation AMD EPYC 9004 Series, DDR5 · up to 3072 GB · 12 DIMM slots · up to 4800 MT/s · 12 channels per CPU. Drive layouts: 8x 3.5-inch SAS/SATA; 12x 3.5-inch SAS/SATA; 8x 2.5-inch NVMe; 8x 2.5-inch Universal SAS3 Low Profile with FPERC11; 16x 2.5-inch SAS/SATA or NVMe; 24x 2.5-inch SAS/SATA. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.

Best for: storage.

Configure this server online

Specifications

Form factor	2U Rack
Generation	16G
CPU	1 socket(s) · 4th Generation AMD EPYC 9004 Series · SP5 · up to 128 cores per CPU · max 400 W TDP
Memory	DDR5 · up to 3072 GB · 12 DIMM slots · up to 4800 MT/s · 12 channels per CPU
Drive bays	8x 3.5-inch SAS/SATA; 12x 3.5-inch SAS/SATA; 8x 2.5-inch NVMe; 8x 2.5-inch Universal SAS3 Low Profile with FPERC11; 16x 2.5-inch SAS/SATA or NVMe; 24x 2.5-inch SAS/SATA
Storage controllers	PERC H965i, PERC H755, PERC H755N, PERC H355, HBA355i, HBA465i · boot: BOSS-N1 (HWRAID 2x M.2 SSDs) · M.2 boot
PCIe	Gen 5.0 · 8 slots
Networking	2x 1GbE LOM · OCP 3.0 slot
GPU	up to 6 GPUs · 3 double-width
Power	700W Titanium, 800W Platinum, 1100W Titanium, 1400W Platinum, 1400W Titanium, 1800W Titanium, 2400W Platinum, 1100W, 2800W Titanium · redundant · hot-swap
Management	iDRAC9 · iDRAC9 Express
Cooling	ASHRAE A4 · hot-swap fans
Dimensions	86.8 × 482.0 × 736.29 mm · 34.5 kg

Chassis configurations

8x 3.5-inch SAS/SATA — 8 front bays — SAS, SATA — request a quote
12x 3.5-inch SAS/SATA — 12 front bays — SAS, SATA — request a quote
8x 2.5-inch NVMe — 8 front bays — NVMe — request a quote
8x 2.5-inch Universal SAS3 Low Profile with FPERC11 — 8 front bays — SAS, SATA, NVMe — request a quote
16x 2.5-inch SAS/SATA or NVMe — 16 front bays — SAS, SATA, NVMe — request a quote
24x 2.5-inch SAS/SATA — 24 front bays — SAS, SATA — request a quote
24x 2.5-inch SAS/SATA with 8 Universal drives — 24 front bays — SAS, SATA, NVMe — request a quote
24x 2.5-inch U.2 drives Gen5 Single Width — 24 front bays — NVMe — request a quote
16x EDSFF E3.S G5x2 with dual RAID fPERC 11N — 16 front bays — NVMe — request a quote
16x EDSFF E3.S G5x2 with dual RAID fPERC 12 — 16 front bays — NVMe — request a quote
32x EDSFF E3.S G5x2 — 32 front bays — NVMe — request a quote
8x EDSFF E3.S G5x4 — 8 front bays — NVMe — request a quote
16x EDSFF E3.S G5x4 — 16 front bays — NVMe — request a quote

Typical refurbished configuration

Real parts from our catalog for this chassis, priced from live market listings and vendor offers:

Processors

AMD EPYC 9174F — $2,533.11
AMD EPYC 9454 — $2,960.85
AMD EPYC 9274F — $3,030.20

Memory

NEW 64GB DDR5 ECC RDIMM 2Rx4 44800R 5600B KSM56R46BD4-64HA 3YEAR WARRA — $2,398.00
64GB DDR5 4800MHz RDIMM Memory KSM48R40BD4TMM-64HMR Compatible Replace — $2,874.50
64GB DDR5 4800MHz ECC Registered DIMM KTH-PL548D4-64G Compatible Repla — $3,035.26

Drives

Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.

Compare with similar Dell servers

Frequently asked questions

What should I do if my Dell R7615 server is stuck on the 'Please wait while the system is initializing' screen?

If your Dell R7615 server is stuck on this message, start by power cycling the server and checking all internal connections for security and damage. If the issue persists, access the iDRAC to review system logs and run diagnostics, and ensure the correct boot device is selected in the BIOS settings. [community thread]

What cable kit do I need to install an NVIDIA RTX A5000 in a Dell R7515 server?

The required cable kit depends on the riser location for the GPU installation. For Riser #1, use part number 0M6CK, and for Riser #4, use part number GPN9K. [community thread]

Which PowerEdge servers support U.3 interfaces?

The Dell Scalable Solutions versions of the R7515, R7525, and R7615 are the only models that currently support U.3 drives. [community thread]