Refurbished Dell PowerEdge R940xa

Request a quote — built to order from tested, warrantied stock.

The Dell PowerEdge R940xa is a refurbished 4U Rack server (14G) for the 2nd Generation Intel Xeon Scalable, DDR4 · up to 15728 GB · 48 DIMM slots · up to 2933 MT/s · 6 channels per CPU · ECC. Drive layouts: 8 drives system; 32 drives system. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.

Best for: ai, hpc, storage.

Configure this server online

Specifications

Form factor4U Rack
Generation14G
CPU4 socket(s) · 2nd Generation Intel Xeon Scalable · LGA3647 · up to 28 cores per CPU · max 205 W TDP
MemoryDDR4 · up to 15728 GB · 48 DIMM slots · up to 2933 MT/s · 6 channels per CPU · ECC
Drive bays8 drives system; 32 drives system
Storage controllersS140, HBA330, H330, H350, H730, H730P · boot: BOSS-S1 (HWRAID 2x M.2 SATA SSDs), IDSDM (microSD) · M.2 boot
PCIeGen 3.0 · 12 slots
Networking4x 1GbE, 4x 10GbE, 2x 10GbE + 2x 1GbE, or 2x 25GbE
GPUup to 8 GPUs · 4 double-width
Power750W Platinum, 1100W Platinum, 1600W Platinum, 2000W Platinum, 2400W Platinum, 750W, 750W Titanium, 1600W Titanium, 2600W Titanium, 1100W, 750W, 1100W · redundant · hot-swap
ManagementiDRAC9 · iDRAC9 Express
CoolingASHRAE A4 · hot-swap fans

Chassis configurations

Typical refurbished configuration

Real parts from our catalog for this chassis, priced from live market listings and vendor offers:

Processors

Memory

Drives

Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.

Compare with similar Dell servers

Frequently asked questions

What should I do if my Dell PowerEdge R940 shows a BP0 PG voltage error and won't start?

To address the BP0 PG voltage error, you need to update the CPLD to version 1.0.5 via iDRAC. However, if the server does not power on, you may need to troubleshoot further or seek professional assistance. [community thread]

What do I need to install two GPUs in a PowerEdge R940XA server?

To install two GPUs in a PowerEdge R940XA server, you will require 16x risers and the appropriate power cables. There is no specific GPU Enablement Kit available for this server. [community thread]