Request a quote — built to order from tested, warrantied stock.
The Dell PowerEdge T340 is a refurbished Tower server (14G) for the Intel Xeon E-2100 and E-2200 Product Family, DDR4 · up to 64 GB · 4 DIMM slots · up to 3200 MT/s · 2 channels per CPU · ECC. Drive layouts: 8x 3.5-inch Hot-Plug drives; 8x 2.5-inch Hot-Plug drives (in 3.5-inch carrier); 4x 3.5-inch Hot-Plug drives (Software RAID); 4x 2.5-inch Hot-Plug drives (in 3.5-inch carrier, Software RAID); 3x 5.25-inch External Bays. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: general.
| Form factor | Tower |
|---|---|
| Generation | 14G |
| CPU | 1 socket(s) · Intel Xeon E-2100 and E-2200 Product Family · LGA1151 · up to 8 cores per CPU · max 95 W TDP |
| Memory | DDR4 · up to 64 GB · 4 DIMM slots · up to 3200 MT/s · 2 channels per CPU · ECC |
| Drive bays | 8x 3.5-inch Hot-Plug drives; 8x 2.5-inch Hot-Plug drives (in 3.5-inch carrier); 4x 3.5-inch Hot-Plug drives (Software RAID); 4x 2.5-inch Hot-Plug drives (in 3.5-inch carrier, Software RAID); 3x 5.25-inch External Bays |
| Storage controllers | PERC S140, PERC H330, PERC H730P, HBA330 (non-RAID) · boot: BOSS (1x M.2 240GB No RAID), BOSS (2x M.2 240GB RAID 1), BOSS (2x M.2 240GB No RAID) · M.2 boot |
| PCIe | Gen 3.0 · 4 slots · 1× x16 |
| Networking | 2x 1GbE LOM (Integrated BROADCOM BCM5720 Gigabit Ethernet Controller) |
| Power | 350W Bronze, 495W Platinum · redundant · hot-swap |
| Management | iDRAC9 · iDRAC9 Basic |
| Cooling | ASHRAE A4 |
| Dimensions | 430.3 × 218 × 589.1 mm · 26 kg |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
The compatible power supply for the PowerEdge T340 is part number G9TRF, which is a 350W unit. Ensure that you check for the correct connector type, as the T340 may have variations with 8-pin and 12-pin connectors. [community thread]
The part number for the TPM 2.0 chip in a T340 is 461-AAEN. For availability in your area, it's recommended to reach out to the spare parts sales team. [community thread]
If your T340 is not booting and shows a failsafe mode indication, first remove any recently added hardware. Then, perform a power drain by disconnecting all cables and holding the power button for 20 seconds. After waiting for three minutes, reconnect the NIC and power, allowing two minutes for the system to initialize before turning it on. [community thread]
The 750W power supply from the T430 is not compatible with the T340. The T340 supports specific power supplies, including 350W and 495W options from different manufacturers. [community thread]
To troubleshoot a no-POST issue, start by powering down the server and disconnecting all components except for the processor, one memory module in socket A1, and one power supply. After waiting for two minutes, reconnect the power and attempt to power on the server. If it still does not POST, the problem may lie with one of the remaining components, such as the motherboard or power supply. [community thread]
A flashing amber LED typically signals a hardware issue. Ensure that your server meets the minimum configuration for POST, which includes a processor, one memory module in socket A1, and one power supply unit. If the problem persists, consider checking the iDRAC or raising a support ticket for further assistance. [community thread]
If your PowerEdge T340 is indicating correctable memory errors for DIMM_A4, consider replacing the DIMM if the errors persist after performing a memory drain and swapping the DIMM to another slot. The server's BIOS includes self-healing features, but ongoing errors may require hardware replacement. [community thread]
To upgrade the BIOS and iDRAC firmware on a Dell PowerEdge T340, start with the BIOS updates followed by the corresponding iDRAC updates, ensuring to reboot between each update. The recommended sequence is: 2.4.1, 4.22.00.00, 2.6.3, 4.32.10.00, 2.8.3, 4.40.40.00, 2.10.1, 5.00.20.10, 2.12.2, 5.10.50.00, 2.14.1, 6.10.30.20, 2.17.3, and finally 7.00.00.175. [community thread]