From $295 USD — built to order from tested, warrantied stock.
The HPE ProLiant DL360 Gen10 is a refurbished 1U Rack server (Gen10) for the Intel Xeon Scalable, DDR4 · up to 3072 GB · 24 DIMM slots · up to 3200 MT/s · 6 channels per CPU · ECC. Drive layouts: 8 SFF with Universal Media Bay options; 10 SFF NVMe Premium; 4 LFF. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: virtualization, database, general.
| Form factor | 1U Rack |
|---|---|
| Generation | Gen10 |
| CPU | 2 socket(s) · Intel Xeon Scalable · LGA3647 · up to 28 cores per CPU · max 205 W TDP |
| Memory | DDR4 · up to 3072 GB · 24 DIMM slots · up to 3200 MT/s · 6 channels per CPU · ECC |
| Drive bays | 8 SFF with Universal Media Bay options; 10 SFF NVMe Premium; 4 LFF |
| Storage controllers | HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller (804338-B21), HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular Controller (804331-B21), HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular LH Controller (869083-B21), HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular LH Controller (869081-B21), HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular LH Controller (869079-B21), HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular Controller (804326-B21) · boot: HPE NS204i-p NVMe PCIe3 OS Boot Device · M.2 boot |
| PCIe | Gen 3.0 · 3 slots · 2× x16 |
| Networking | 2x 1GbE LOM (if equipped) |
| GPU | up to 2 GPUs |
| Power | 500W Platinum, 800W Titanium, 800W Platinum, 800W DC -48V, 800W Universal, 1600W Platinum, 1600W DC -48V, 1800W Titanium · redundant · hot-swap |
| Management | iLO 5 · iLO 5 Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis prices are current refurbished cost plus margin; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
An amber light on your HP ProLiant DL360 Gen10 server typically signals a hardware issue. For further assistance, consult the Service and Maintenance Guide from the HPE Support Center or check related forum discussions regarding similar problems. [community thread]
To fix the 270 iLO communication error, first update the iLO Firmware to version 2.02 or higher and the BIOS to version 1.20_08-26-2014 or later. If the problem continues, power down the server, disconnect the power supply, wait for 30-60 seconds, and then reconnect it. [community thread]
The error indicates that the System Programmable Logic Device (PLD) firmware is outdated. To resolve this, ensure the PLD is updated by booting into Intelligent Provisioning and running the firmware update using the Service Pack for ProLiant (SPP). If the PLD does not update, consider contacting HPE support for further assistance. [community thread]
This issue may be related to a faulty temperature sensor or hardware component. It is advisable to check the installation of fans, heat sinks, and air baffles, and to consult HPE support for further diagnosis and assistance. [community thread]
The subpar performance in RAID5 and RAID1 is likely due to the absence of a physical cache module, which is necessary for enabling write-back caching. Without this module, the controller operates in write-through mode, resulting in slower write speeds. To improve performance, ensure a compatible cache module is installed and that the appropriate licenses for caching are applied. [community thread]
NVMe SSDs do not work with hardware RAID controllers, as these controllers are designed for SAS and SATA drives. NVMe drives connect directly to the CPU via PCIe lanes, which means they cannot be configured in RAID using traditional hardware RAID methods. [community thread]
To manage the RAID controller, you can use the UEFI System Utilities for initial configuration. For ongoing management, the HPE MegaRAID Storage Administrator (MRSA) tool may not be available, but you can utilize the StorCLI command-line interface to check the status and configure the RAID settings. [community thread]
First, ensure that all DIMMs are properly seated and compatible with your server. If the issue persists, check that both processors are correctly installed and functioning. Additionally, try running the server with minimal hardware configuration to isolate the problem. [community thread]