Request a quote — built to order from tested, warrantied stock.
The HPE ProLiant DL360 Gen11 is a refurbished 1U Rack server (Gen11) for the 4th and 5th Generation Intel Xeon Scalable, DDR5 · up to 8192 GB · 32 DIMM slots · up to 5600 MT/s · 8 channels per CPU · ECC. Drive layouts: 20 EDSFF Carrier 1T (EC1); 8 SFF Basic Carrier (BC); 4 LFF Low Profile (LP). Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: storage, virtualization, database, general.
| Form factor | 1U Rack |
|---|---|
| Generation | Gen11 |
| CPU | 2 socket(s) · 4th and 5th Generation Intel Xeon Scalable · LGA4677 · up to 64 cores per CPU · max 385 W TDP |
| Memory | DDR5 · up to 8192 GB · 32 DIMM slots · up to 5600 MT/s · 8 channels per CPU · ECC |
| Drive bays | 20 EDSFF Carrier 1T (EC1); 8 SFF Basic Carrier (BC); 4 LFF Low Profile (LP) |
| Storage controllers | Intel VROC SATA, Intel VROC NVMe, MR216i-p Gen11, MR416i-p Gen11, SR932i-p Gen11 · boot: HPE NS204i-u NVMe Hot Plug Boot Optimized Storage Device, HPE NS204i-u v2 960GB NVMe Hot Plug Boot Optimized Storage Device, HPE NS204i-u v2 960GB NVMe SED Hot Plug Boot Optimized Storage Device · M.2 boot |
| PCIe | Gen 5.0 · 3 slots · 3× x16 |
| Networking | OCP 3.0 slot |
| GPU | up to 2 GPUs |
| Power | 500W Platinum, 800W Platinum, 800W Titanium, 1000W Titanium, 1600W, 1600W Platinum, 1800W Titanium, 2200W Titanium · redundant · hot-swap |
| Management | iLO 6 · iLO 6 Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
This issue may arise if the workload profile in the BIOS has disabled virtualization options. To resolve this, access the BIOS settings, navigate to the workload profile, and switch to either 'Virtualization - Power Efficient' or 'Virtualization - Max Performance'. If options remain greyed out, resetting the BIOS to default settings may also help. [community thread]
SATA SSDs do not support the UNMAP command, which is a requirement for the operating system to recognize them as SSDs. Consequently, the OS may classify the SATA RAID array as an HDD, leading to features like defragmentation being enabled. Disabling defrag is advisable, but be aware that without TRIM support, performance may degrade over time. [community thread]
Ensure that Intel VMD and Intel VROC are enabled in the RBSU settings. Additionally, verify that the NVMe drives are properly connected to the correct backplane and that the cabling is intact. If issues persist, consult the Intel VROC documentation for further troubleshooting steps. [community thread]
With one CPU in a DL360 Gen11 8 Bay SFF server, all 8 drive bays are accessible. You will have 16 DIMM slots available for memory, and for PCIe slots, there is one primary riser with a combination of 1x16 FH and 1x16 LP slots. For detailed specifications, consult the HPE DL360 Gen11 Quickspecs guide. [community thread]
If you're unable to reach the firmware update repository, ensure that your network settings are correctly configured and that the server has internet access. Additionally, verify that the URL for the firmware repository is correct and accessible from other devices; if it returns a 'Forbidden' error, the issue may be with the repository itself rather than your server's configuration. [community thread]
To troubleshoot the fan speed issue, access iLO 6 to monitor fan speeds, thermal readings, and event logs when the fans increase in speed. Ensure that iLO 6, BIOS, and SPP are updated to their latest versions, and consider analyzing the AHS log for any components causing the issue. You can also adjust fan settings in the Power & Thermal section to optimize cooling performance. [community thread]
It appears that updating or downgrading the iLO firmware on DL360 Gen11 servers consistently results in the loss of the syslog entry, while other logs like IML remain unaffected. This issue has been observed across multiple Gen11 servers and seems to occur regardless of the firmware version applied. [community thread]
The 'Expand' function is only available when there is a single logical drive configured per array. Once more than one logical drive is created, the option to expand becomes unavailable, which appears to be a limitation of the controller. [community thread]