Request a quote — built to order from tested, warrantied stock.
The HPE ProLiant DL560 Gen10 is a refurbished 2U Rack server (Gen10) for the Intel Xeon Scalable, DDR4 · up to 6144 GB · 48 DIMM slots · up to 3200 MT/s · ECC. Drive layouts: 8x 2.5-inch SFF. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: hpc, virtualization, database, general.
| Form factor | 2U Rack |
|---|---|
| Generation | Gen10 |
| CPU | 4 socket(s) · Intel Xeon Scalable · LGA3647 · up to 28 cores per CPU · max 165 W TDP |
| Memory | DDR4 · up to 6144 GB · 48 DIMM slots · up to 3200 MT/s · ECC |
| Drive bays | 8x 2.5-inch SFF |
| Storage controllers | HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular LH Controller (869083-B21), HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular LH Controller (869081-B21), HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller (830824-B21), HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular LH Controller (869079-B21), HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller (804394-B21) · boot: MicroSD, M.2 SATA · M.2 boot |
| PCIe | Gen 3.0 · 6 slots · 6× x16 |
| Networking | 4x 1GbE · OCP slot |
| GPU | up to 3 GPUs |
| Power | 800W Platinum, 1200W Gold, 1600W Platinum · redundant · hot-swap |
| Management | iLO 5 · iLO 5 Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
To resolve this issue, try changing the power supply configuration to 2+2 redundancy or 3+1, and ensure the integrity of the CPU socket pins. Additionally, reseat the mezzanine board, clear the NVRAM, and reset the BIOS/UEFI settings to default. Testing different CPU pairings and adjusting the RAM configuration may also help. [community thread]
Check that the firmware for both the drives and the RAID controller is current. If the problem continues, power down the server, reseat the drives, and observe if the status changes. If the issue remains, consider testing with a replacement drive to help identify the cause. [community thread]
To disable the VID drive, update the iLO firmware to the latest version, then navigate to Intelligent Provisioning, go to BIOS/Platform Configuration (RBSU), select USB options, and disable the Virtual Install Disk. [community thread]
The issue may stem from compatibility problems with third-party monitoring software like Zabbix, which has not been officially tested with HPE iLO. Users have reported that iLO stops responding after a period, requiring a reset to restore functionality. [community thread]
This behavior may occur due to thermal management settings or firmware issues. It is advisable to update the System BIOS and iLO firmware, and if the problem persists, consider checking the server's cooling configuration and hardware components. [community thread]
The Virtual Install Disk feature is no longer supported in Gen9 and Gen10 servers. Ensure that your iLO firmware is up to date, as this may help resolve the issue. [community thread]
Ensure that you first upgrade the firmware to version 5.61, as this is necessary to enable the PLDM firmware update functionality. Once that is completed, you can then use the FWPKG file to update directly to version 6.22 or later through iLO without needing an operating system. [community thread]