Request a quote — built to order from tested, warrantied stock.
The HPE ProLiant ML110 Gen10 is a refurbished 4.5U Tower server (Gen10) for the Intel Xeon Scalable (1st/2nd Gen), DDR4 · up to 384 GB · 6 DIMM slots · up to 3200 MT/s · ECC. Drive layouts: 4x 3.5-inch LFF NHP; 8x 2.5-inch SFF. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: general.
| Form factor | 4.5U Tower · 4U |
|---|---|
| Generation | Gen10 |
| CPU | 1 socket(s) · Intel Xeon Scalable (1st/2nd Gen) · LGA3647 · up to 18 cores per CPU · max 165 W TDP |
| Memory | DDR4 · up to 384 GB · 6 DIMM slots · up to 3200 MT/s · ECC |
| Drive bays | 4x 3.5-inch LFF NHP; 8x 2.5-inch SFF |
| Storage controllers | Smart Array S100i, Smart Array E208i-p, Smart Array P408i-p · boot: MicroSD |
| PCIe | Gen 3.0 · 4 slots · 2× x16 |
| Networking | 2x 1GbE |
| GPU | up to 2 GPUs · 1 double-width |
| Power | 350W Gold, 550W Platinum, 800W Platinum |
| Management | iLO 5 · iLO 5 Standard |
| Cooling | ASHRAE A4 |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
After a firmware upgrade, high fan speeds may occur due to various factors. Check for any unnecessary PCI cards and remove them, test the fans in UEFI mode, and ensure all fans are functioning properly. Additionally, monitor the temperature readings in the iLO interface to identify any potential issues. [community thread]
Try disconnecting any unnecessary PCI cards or external devices that may be connected. Additionally, check the IML log in iLO for any error messages and consider clearing the NVRAM using the System Maintenance Switch on the system board. [community thread]
To resolve detection issues with the HPE Smart Array Controller P408i-P SR Gen10 in Windows Server 2016, download and install the appropriate driver for the controller. This may help the operating system recognize the controller during installation. [community thread]
Verify that the IPv4 address is correctly configured using the HPE Lights-Out Online Configuration Utility, which can be installed on your server. If the address is set correctly, try restarting the iLO management controller, as the firmware upgrade may have reset settings to defaults. [community thread]
The cache cable is necessary only if a Smart Array P-Series controller is installed, as this server supports the installation of a FBWC module in that scenario. If you are using a different RAID controller for local disks, the cache cable may not be needed. [community thread]
Yes, the Bezel Lock Kit for the HPE ProLiant ML110 Gen11 includes a key for the front door/bezel lock feature. [community thread]
The increased fan speed may be due to the installation of an incompatible network card, which can affect system cooling. Ensure that the correct AMS version is installed and verify that all components are properly seated and compatible with the server. [community thread]
This error typically occurs due to a corrupted SPS firmware image. To resolve the issue, you should update the Server Platform Services firmware. [community thread]