Request a quote — built to order from tested, warrantied stock.
The HPE ProLiant ML350 Gen10 is a refurbished 4U Tower/Rack server (Gen10) for the Intel Xeon Scalable (1st/2nd Gen), DDR4 · up to 3072 GB · 24 DIMM slots · up to 2933 MT/s · ECC. Drive layouts: 8x 2.5-inch SFF; 4x 3.5-inch LFF. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: virtualization, database, general.
| Form factor | 4U Tower/Rack · 5U |
|---|---|
| Generation | Gen10 |
| CPU | 2 socket(s) · Intel Xeon Scalable (1st/2nd Gen) · LGA3647 · up to 28 cores per CPU · max 165 W TDP |
| Memory | DDR4 · up to 3072 GB · 24 DIMM slots · up to 2933 MT/s · ECC |
| Drive bays | 8x 2.5-inch SFF; 4x 3.5-inch LFF |
| Storage controllers | HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller (804338-B21) — requires SFF AROC Cable (877575-B21) or LFF AROC Cable (874573-B21); requires Redundant Fan Cage Kit (874572-B21), HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular Controller (804331-B21) — requires SFF AROC Cable (877575-B21) or LFF AROC Cable (874573-B21), HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller (830824-B21) — requires SFF SA/HBA Cable (874575-B21) or LFF SA/HBA Cable (874574-B21), HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller (804394-B21) — requires SFF SA/HBA Cable (874575-B21) or LFF SA/HBA Cable (874574-B21), HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular Controller (804326-B21) — requires SFF AROC Cable (877575-B21) or LFF AROC Cable (874573-B21) · boot: HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device (P12965-B21) — UEFI mode only · M.2 boot |
| PCIe | Gen 3.0 · 8 slots · 4× x16 |
| Networking | 4x 1GbE · OCP slot |
| GPU | up to 3 GPUs · 2 double-width |
| Power | 500W Platinum, 800W Platinum, 1600W Platinum · redundant · hot-swap |
| Management | iLO 5 · iLO 5 Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
It seems there may be a hardware issue with your server. Try powering on the server with a minimal configuration by removing all add-on cards. If the problem persists, consider contacting HPE support for further assistance. [community thread]
Yes, you can substitute a failed drive with a larger capacity, but the RAID configuration will default to the size of the smallest drive in the array. While it's possible to use a slower drive, be aware that this may affect overall performance. [community thread]
This issue may be related to firmware or embedded system settings rather than user activity. To troubleshoot, check the iLO logs during the fan spike, verify BIOS/iLO versions, consider downgrading iLO for testing, ensure AMS is functioning properly, and monitor hardware sensors. If the problem persists, contact HPE Support for further assistance. [community thread]
To monitor the array status using SNMP on the ProLiant ML350 Gen10, ensure you are using the correct OID, which is 1.3.6.1.4.1.232.3.2.2.1.1.6 for cpqDaCntlrCondition. If you receive a NULL value, consider downloading the SIM MIB kit and refer to the documentation for compiling and customizing SNMP MIBs for further assistance. [community thread]
If your ML350 Gen10 server fails to POST and indicates an internal processor error, first ensure that the CPUs are properly seated and compatible. You may also need to clear the NVRAM/CMOS by following the appropriate steps in the server manual. If the issue persists, consider checking for additional error codes, updating or rolling back the firmware, and inspecting other hardware components. [community thread]
The absence of PCIe Slot 4 in the BIOS bifurcation menu may be due to specific hardware limitations or motherboard configurations. It's advisable to consult the server's QuickSpecs or User Guide for detailed information on the bifurcation capabilities of each slot. [community thread]
To resolve the issue, ensure the F10 prompt is enabled in the server security settings. If iLO FIPS mode is active, disable it temporarily as it may prevent IP from launching. Additionally, perform an offline installation of Intelligent Provisioning using the latest recovery media and update firmware from a local source to avoid dependency issues. [community thread]
If your ML350 Gen11 servers are experiencing high fan speeds, ensure that all drivers, firmware, and BIOS are updated to the latest versions. If the issue persists, consider checking the server's thermal settings or consulting the manufacturer's documentation for fan and thermal management solutions. [community thread]