Request a quote — built to order from tested, warrantied stock.
The Lenovo ThinkSystem SR630 is a refurbished 1U Rack server (V1) for the 2nd Gen Intel Xeon Scalable, DDR4 · up to 3072 GB · 24 DIMM slots · up to 3200 MT/s · ECC. Drive layouts: 10x 2.5-inch SAS/SATA/NVMe; 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA; 10x 2.5-inch SAS/SATA/NVMe + 2x 2.5-inch SAS/SATA (rear). Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: virtualization, database, general.
| Form factor | 1U Rack |
|---|---|
| Generation | V1 |
| CPU | 2 socket(s) · 2nd Gen Intel Xeon Scalable · LGA3647 · up to 28 cores per CPU · max 205 W TDP |
| Memory | DDR4 · up to 3072 GB · 24 DIMM slots · up to 3200 MT/s · ECC |
| Drive bays | 10x 2.5-inch SAS/SATA/NVMe; 4x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA; 10x 2.5-inch SAS/SATA/NVMe + 2x 2.5-inch SAS/SATA (rear) |
| Storage controllers | RAID 930-8i, RAID 530-8i, HBA 430-8i · boot: Dual M.2 (RAID 1) · M.2 boot |
| PCIe | Gen 3.0 · 3 slots · 3× x16 |
| Networking | OCP slot |
| GPU | up to 2 GPUs |
| Power | 750W Platinum, 1100W Platinum · redundant · hot-swap |
| Management | XCC · XCC Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
No, the firmware upgrade for the SR630 server must be done one file at a time through the XCC web interface. Other methods may be available, but issues with the server could affect the upgrade process. [community thread]
First, revert the jumper J181 back to Pin1-2 and power on the server. Then, access the UEFI settings by pressing F1 and navigate to BMC Settings to reset to factory defaults, which will restore the default user ID and password. [community thread]
To rebuild the RAID 1 array, ensure that the replacement M.2 drive matches the original drive's specifications, particularly in size and type. Once the compatible drive is installed, boot the system, and the RAID should automatically start rebuilding, which can be monitored in the BIOS or the XClarity Controller. [community thread]
To resolve the PSU mismatch error, first ensure that all power supply units (PSUs) are of the same model and firmware version, as using mismatched units can lead to errors. Additionally, check that your server's firmware, including the XClarity Controller, is updated to the latest version. If the problem continues, consider performing a power cycle and clearing the error logs. [community thread]
Yes, both part numbers refer to the same functional component, with 01CV832 being a later revision of the original 01CV830. No action is needed, as they are supported the same way in the SR630 and utilize the same firmware and driver packages. [community thread]