Request a quote — built to order from tested, warrantied stock.
The Lenovo ThinkSystem SR650 V2 is a refurbished 2U Rack server (V1) for the 3rd Gen Intel Xeon Scalable, DDR4 · up to 8192 GB · 32 DIMM slots · up to 3200 MT/s · 8 channels per CPU · ECC. Drive layouts: 12x 3.5-inch SAS/SATA; 8x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA; 16x 2.5-inch SAS/SATA; 24x 2.5-inch SAS/SATA; 8x 2.5-inch NVMe (Direct). Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: storage, virtualization, database.
| Form factor | 2U Rack |
|---|---|
| Generation | V1 |
| CPU | 2 socket(s) · 3rd Gen Intel Xeon Scalable · LGA4189 · up to 40 cores per CPU · max 270 W TDP |
| Memory | DDR4 · up to 8192 GB · 32 DIMM slots · up to 3200 MT/s · 8 channels per CPU · ECC |
| Drive bays | 12x 3.5-inch SAS/SATA; 8x 3.5-inch SAS/SATA; 8x 2.5-inch SAS/SATA; 16x 2.5-inch SAS/SATA; 24x 2.5-inch SAS/SATA; 8x 2.5-inch NVMe (Direct) |
| Storage controllers | RAID 940-32i, RAID 940-16i, RAID 940-8i, RAID 540-16i, RAID 540-8i, 440-16i HBA · boot: M.2 · M.2 boot |
| PCIe | Gen 4.0 · 8 slots |
| Networking | OCP 3.0 slot |
| GPU | up to 8 GPUs · 3 double-width |
| Power | 500W Platinum, 750W Platinum, 750W Titanium, 1100W Platinum, 1100W Titanium, 1800W Platinum, 1100W · redundant · hot-swap |
| Management | XCC · XCC Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
| Dimensions | 87 × 445 × 764 mm · 38.8 kg |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
Ensure you have the appropriate NVMe RAID FoD license, as only Intel-branded NVMe SSDs are supported for RAID configurations. Additionally, verify that you are using Lenovo-qualified NVMe drives for compatibility and consider updating your firmware with the latest Lenovo Bootable Media Creator ISO. [community thread]
If your server indicates a low CMOS battery, it is necessary to replace the battery. Additionally, updating the firmware may help enhance battery performance. [community thread]
To activate Intel VT-d, reboot the server and press F1 to access the UEFI Setup. Navigate to System Settings, then Operating Modes, set it to Custom Mode, and save the changes. Next, go to Devices and I/O Ports, enable Intel VT for Directed I/O (VT-d) and SR-IOV, then save and reset the system. [community thread]
To fix the fqxspca0016m error, ensure that your server has the correct number of fans installed based on its configuration—typically 6 fans for systems with 2 CPUs. If you have already installed the correct number of fans, reboot the XCC for fan detection and check that the fans meet the thermal requirements. If issues continue, collect service logs from the XCC WebGUI and upload them for further analysis. [community thread]
The PCIe Bifurcation option is not available in the UEFI settings for the Lenovo SR650 Gen 1, as it is managed automatically based on the riser card and installed adapters. With the ThinkSystem 2U x8/x8/x8 PCIe Riser 1, the lanes are pre-configured for x8 operation, and no additional settings are necessary. [community thread]
To confirm compatibility, refer to the Lenovo VMware Recipe link for the SR650 V2, which provides a detailed matrix. Ensure that you are using the latest drivers and firmware for your adapters, and check for any specific version updates, such as the ThinkSystem RAID 930-8i adapter. [community thread]
To bypass the redirection to XClarity Administrator when accessing the XClarity Controller, you can disable the single sign-on feature. Detailed instructions for this process can be found in the Lenovo support documentation. [community thread]
If your SR650 V2 is running pre-production firmware, standard update methods may fail due to build ID mismatches. Contact Lenovo technical support to request the 'SR650 V2 Bridge Firmware Package' for transitioning from pre-GA to GA firmware, which should enable you to proceed with standard updates. [community thread]