Refurbished Lenovo ThinkSystem SR655 V3

Request a quote — built to order from tested, warrantied stock.

The Lenovo ThinkSystem SR655 V3 is a refurbished 2U Rack server (V3) for the 5th Gen AMD EPYC 9005 "Turin" / 4th Gen AMD EPYC 9004 "Genoa", DDR5 · up to 3072 GB · 12 DIMM slots · up to 6400 MT/s · 12 channels per CPU · ECC. Drive layouts: 4x 2.5-inch (front PCIe); 8x 2.5-inch; 16x 2.5-inch; 24x 2.5-inch; 8x 3.5-inch; 12x 3.5-inch. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.

Best for: storage.

Configure this server online

Specifications

Form factor2U Rack
GenerationV3
CPU1 socket(s) · 5th Gen AMD EPYC 9005 "Turin" / 4th Gen AMD EPYC 9004 "Genoa" · SP5 · up to 160 cores per CPU · max 400 W TDP
MemoryDDR5 · up to 3072 GB · 12 DIMM slots · up to 6400 MT/s · 12 channels per CPU · ECC
Drive bays4x 2.5-inch (front PCIe); 8x 2.5-inch; 16x 2.5-inch; 24x 2.5-inch; 8x 3.5-inch; 12x 3.5-inch
Storage controllersThinkSystem 4350-8i HBA — 8-port 12Gb SAS HBA (entry tier), ThinkSystem 4350-16i HBA — 16-port 12Gb SAS HBA, ThinkSystem 5350-8i RAID — 8-port 12Gb SAS RAID (entry RAID), ThinkSystem 9350-8i RAID — 8-port 12Gb SAS RAID + cache, ThinkSystem 9350-16i RAID — 16-port 12Gb SAS RAID + cache, ThinkSystem 4450-16i RAID — 16-port 24Gb SAS-4 RAID (entry tier) · boot: ThinkSystem 7mm SATA/NVMe 2-Bay Rear Enablement Kit v2 (feature BU0N) — 7mm rear bay (slot 3 OR 6, not both); SATA OR NVMe (specify via BTTV/BTTW); RAID-1 NVMe via RAID 540-8i (BT7P) in slot 3, ThinkSystem 2U 7mm Drive Kit w/ NVMe RAID (feature B8P3) — Marvell 88NR2241 NVMe RAID Controller integrated; NVMe drives only, ThinkSystem 7mm SATA/NVMe 2-Bay Rear Hot-Swap RAID Enablement Kit (feature BYFG) — Broadcom RAID Controller integrated; SATA or NVMe drives, ThinkSystem RAID 540-8i for M.2/7mm NVMe Boot Enablement (feature BT7P) — Tri-Mode RAID adapter required for 7mm NVMe RAID-1 with BU0N kit; cannot be used for other drive bays · M.2 boot
PCIeGen 5.0 · 10 slots
NetworkingOCP 3.0 slot
GPUup to 8 GPUs · 3 double-width
Power750W Platinum, 750W Titanium, 1100W Platinum, 1100W Titanium, 1100W Platinum, 1800W Platinum, 1800W Titanium, 2400W Platinum, 2400W Titanium, 2600W Platinum, 2600W Titanium · redundant · hot-swap
ManagementXCC · XCC Standard
CoolingASHRAE A4 · hot-swap fans
Dimensions87 × 445 × 766 mm · 38.8 kg

Chassis configurations

Typical refurbished configuration

Real parts from our catalog for this chassis, priced from live market listings and vendor offers:

Memory

Drives

Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.

Compare with similar Lenovo servers

Frequently asked questions

What should I do if my server is not recognizing all installed NVMe drives?

First, verify that the NVMe drives in the affected bays are properly seated and connected. Restarting the XClarity Controller (XCC) may also help restore the drive inventory. Additionally, ensure that your server's firmware is up to date and check the VMD settings in the BIOS/UEFI for correct configuration. [community thread]

Why is the Broadcom OCP not detected in my SR655 V3 server?

First, ensure the OCP card is properly seated and check for any visible damage. If the card is still unrecognized, test it in a different compatible server to determine if the issue lies with the OCP itself. [community thread]

What is the AC input voltage range for the ThinkSystem SR655 v3 750W power supplies?

The ThinkSystem SR655 v3 750W power supplies are designed to automatically sense dual voltages, supporting both 110V AC (100-127V 50/60 Hz) and 220V AC (200-240V 50/60 Hz). Therefore, they can operate with 208V AC at 60 Hz. [community thread]

What is the performance difference between direct CPU PCIe connections and retimer connections for NVMe drives in the Lenovo ThinkSystem SR655 V3?

Direct CPU PCIe connections typically provide lower latency and more stable bandwidth compared to retimer connections. While retimers can support additional drives, they may introduce slight latency; however, for most applications, the performance difference is negligible. [community thread]

Can I use non-Lenovo Solidigm D7-PS1010 and D7-PS1030 NVMe U2 Gen5 drives in a SR655 V3 server?

While you may be able to install these drives, their compatibility is not guaranteed, and firmware updates cannot be performed through XCC. Additionally, if any issues arise, warranty coverage may not apply. [community thread]