Part number 04V432
Price: $133.00 USD
PowerEdge R750 Internal Plastic Cooling Shroud
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]
The standard R750 GPU power kit ships with 12-pin to 8-pin and 12-pin to dual 6+2 cables, which don't fit 16-pin cards. Dell offers several GPU installation kits for the R750 keyed to the specific GPU model, so the right kit part number depends on which card you're installing — check the kit matched to your GPU before ordering. [community thread]
Start by reviewing the Lifecycle Controller logs (F10 at boot) for details on the warning, confirm System BIOS and iDRAC are current, and reseat the card — slot position and auxiliary power connections matter for the M10. If the warning persists after a reseat and firmware update, the card itself may need swapping to isolate hardware vs. configuration. [community thread]
The Micron 7500 U.3 NVMe disks are not compatible with Dell R750 servers, which only support U.2 drives. Therefore, there is no firmware available for U.3 disks on this server model, and users should consult Micron for further assistance. [community thread]