Dell SATA Modular M.2 BOSS-S1 Controller Card - Boot

Part number 0WX5KW · also known as BOSS1

Price: $168.00 USD

Dell SATA Modular M.2 BOSS-S1 Controller Card - Boot Optimized Storage Subsystem BOSS1 / BOSS-S1V4 ( 2 ) Two M.2 Key M Slots ( Compatible With 2280 )

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What should I do if my Dell R450 shows HWC8010 and UEFI0459 errors during startup?

To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]

What cables are needed for an H755N Front NVMe RAID card in a PowerEdge R650xs server?

The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]

How can I resolve the issue of my 2Rx4 memory being detected as Quad Rank?

To address this issue, ensure that your DIMMs are properly populated according to the server's memory guidelines. Check the BIOS version and verify the specifications of the installed DIMMs, as only certain capacities are supported for 2R DIMMs. [community thread]

Why do identical R450 servers show different IPMI sensor readings?

Discrepancies in IPMI sensor data among identical R450 servers can occur due to variations in the tools used for monitoring. Using a more reliable command-line tool like 'ipmitool' may provide consistent and comprehensive sensor information across all servers. [community thread]

Can I use a second PCIe card in an R650xs with only one CPU installed?

No, to utilize a second PCIe card in slot 3 via riser 2, a second CPU is necessary. Without the second CPU, slot 3 will not function, and you will only have access to slot 1. [community thread]