Part number 3JW2V
Request a quote
DELL BOSS S2 MODULE BLANK FILLER FOR DELL EMC POWEREDGE R750
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]
To acquire the GPU installation kit for the PowerEdge R7625, it is recommended to contact the customer support hotline for a quote tailored to your system. The installation cable kit number is typically 06KX6, which includes specific cables such as 0M6CK, GPN9K, 0DK9Y, and MD9J9. [community thread]
The standard R750 GPU power kit ships with 12-pin to 8-pin and 12-pin to dual 6+2 cables, which don't fit 16-pin cards. Dell offers several GPU installation kits for the R750 keyed to the specific GPU model, so the right kit part number depends on which card you're installing — check the kit matched to your GPU before ordering. [community thread]
Start by reviewing the Lifecycle Controller logs (F10 at boot) for details on the warning, confirm System BIOS and iDRAC are current, and reseat the card — slot position and auxiliary power connections matter for the M10. If the warning persists after a reseat and firmware update, the card itself may need swapping to isolate hardware vs. configuration. [community thread]