Part number 4CJTY · also known as NH9KF
Request a quote
Dell PowerEdge R750 4 x 2.5 Rear Flex Bay + Cables - (Cables - NH9KF + GNKHG)
| component type | mechanical |
|---|
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
To convert an R750 into a vSAN ESA ReadyNode, it is recommended to use an HBA355. However, be aware that changes to the storage configuration after purchase are not supported, and there are no kits available for modifications. [community thread]
The required part numbers are WTHHV for the 12x3.5-inch SAS/SATA cable assembly and R4C4X for the micro cable assembly. It's advisable to verify these numbers against the documentation to ensure accuracy. [community thread]
If your server indicates a backplane connection error, ensure that all necessary cables from the motherboard to the backplane are securely connected. If the issue persists, refer to the manufacturer's documentation for troubleshooting steps or check for similar configurations to verify cable connections. [community thread]