Part number 4HYC0
Request a quote
SAS Cable Dell PowerEdge R550/R750/R750xs/R7525 16x2.5"/24x2.5" 1xSFF-8654 R/A 8i FCTRL-B for 1xSFF-8654 STR 8i 16BP
| component type | cable |
|---|
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]
Ensure that both power and signal cables are properly connected to the BOSS-2 controller. Additionally, inspect the connectors for any bent or loose pins, and verify that the riser slots are not pinching the power cable. [community thread]
To convert an R750 into a vSAN ESA ReadyNode, it is recommended to use an HBA355. However, be aware that changes to the storage configuration after purchase are not supported, and there are no kits available for modifications. [community thread]
The required part numbers are WTHHV for the 12x3.5-inch SAS/SATA cable assembly and R4C4X for the micro cable assembly. It's advisable to verify these numbers against the documentation to ensure accuracy. [community thread]