Part number 5M8WD
Price: $5.60 USD
DELL MEMORY MODULE BLANK FILLER FOR DELL EMC POWEREDGE C6420 / FC420 / FC430 / FC630 / FC640 / FC830 / M630 / R430 / R530 / R630 / R650XS / R730 / R730XD / R750 / R750XA / R830 / R940 / M640 / M830 / MX750C COMPUTE SLED / PRECISION RACK 7910 WORKSTATION /
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]
The standard R750 GPU power kit ships with 12-pin to 8-pin and 12-pin to dual 6+2 cables, which don't fit 16-pin cards. Dell offers several GPU installation kits for the R750 keyed to the specific GPU model, so the right kit part number depends on which card you're installing — check the kit matched to your GPU before ordering. [community thread]
The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]
An expansion module is not necessary for the R940 server, as it supports only two CPUs mounted directly on the motherboard. All four CPUs are installed on the motherboard in other models. [community thread]