Part number 867998-B21
Price: $109.82 USD
HPE ProLiant DL325 DL360 DL365 DL360 Gen10 Plus 1U Security Bezel
| accessory kind | bezel |
|---|
Configure a complete server with live pricing
An amber light on your HP ProLiant DL360 Gen10 server typically signals a hardware issue. For further assistance, consult the Service and Maintenance Guide from the HPE Support Center or check related forum discussions regarding similar problems. [community thread]
To fix the 270 iLO communication error, first update the iLO Firmware to version 2.02 or higher and the BIOS to version 1.20_08-26-2014 or later. If the problem continues, power down the server, disconnect the power supply, wait for 30-60 seconds, and then reconnect it. [community thread]
The error indicates that the System Programmable Logic Device (PLD) firmware is outdated. To resolve this, ensure the PLD is updated by booting into Intelligent Provisioning and running the firmware update using the Service Pack for ProLiant (SPP). If the PLD does not update, consider contacting HPE support for further assistance. [community thread]
This issue may be related to a faulty temperature sensor or hardware component. It is advisable to check the installation of fans, heat sinks, and air baffles, and to consult HPE support for further diagnosis and assistance. [community thread]
The subpar performance in RAID5 and RAID1 is likely due to the absence of a physical cache module, which is necessary for enabling write-back caching. Without this module, the controller operates in write-through mode, resulting in slower write speeds. To improve performance, ensure a compatible cache module is installed and that the appropriate licenses for caching are applied. [community thread]