Part number 8Y3D7 · also known as M5X10MM · N5C4T · TJC6V
Request a quote
DELL SLIDING RAIL KIT FOR DELL EMC POWEREDGE R440 / R450 / R6415 / R650XS / R6515 / R6525 - TYPE A11 KING SLIDE COMBO ( 1 ) ONE LEFT RAIL PN: N5C4T ( 1 ) ONE RIGHT RAIL PN: 4HHKC ( 1 ) ONE SCREW AND WASHER ASSEMBLY PN: 89J54 / TJC6V ( 4 M5X10MM SCREWS 4 M
| accessory kind | rail |
|---|
Configure a complete server with live pricing
This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]
To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]
It is generally safe to update both the BIOS and iDRAC firmware to the latest versions. It is recommended to update the iDRAC firmware before proceeding with the BIOS update. [community thread]
Documentation for supported hardware components for the Dell R430, R440, R730, and R740 servers can be found in their respective technical guides. For detailed specifications, refer to the manuals available on Dell's support website, or contact the sales department for information on any unsupported hardware. [community thread]
For retrofitting the R440 to support NVMe drives, it's advisable to refer to the user manual for accurate cabling instructions. A PCIe extender card may be necessary if utilizing the SAS drive slots, and ensure that the SAS cables are of adequate length to connect to the HBA card. [community thread]