Part number DF7XH · also known as RISER2 · RISER2A
Request a quote
DELL 2X16 RISER2 BOARD FOR DELL EMC POWEREDGE R750 / R750XA - BOTTOM RISER2A CARD ( R2A / R2B LOW PROFILE ) ( 2 ) TWO PCI-E 4.0 X16 SLOTS
| component type | riser |
|---|
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]
To convert an R750 into a vSAN ESA ReadyNode, it is recommended to use an HBA355. However, be aware that changes to the storage configuration after purchase are not supported, and there are no kits available for modifications. [community thread]
If your server indicates a backplane connection error, ensure that all necessary cables from the motherboard to the backplane are securely connected. If the issue persists, refer to the manufacturer's documentation for troubleshooting steps or check for similar configurations to verify cable connections. [community thread]