Dell Battery 3.7V 500MAH for Dell Emc PowerEdge R6525

Part number K2MKJ

Request a quote

DELL BATTERY 3.7V 500MAH FOR DELL EMC POWEREDGE R6525 / R750 / C6620 ( C6600 ) - COMPATIBLE WITH PERC H745 / FRONT H755 / H755N

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What parts are needed to install a GPU on a PowerEdge R750XS server?

The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]

Why isn't a second CPU recognized after reinstalling it in a PowerEdge R750?

This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]

Is it safe to update the BIOS and iDRAC firmware on a PowerEdge R6525 server, and which should be updated first?

It is generally safe to update both the BIOS and iDRAC firmware to the latest versions. It is recommended to update the iDRAC firmware before proceeding with the BIOS update. [community thread]

Which power cable do I need for a 16-pin (12VHPWR) GPU in a PowerEdge R750?

The standard R750 GPU power kit ships with 12-pin to 8-pin and 12-pin to dual 6+2 cables, which don't fit 16-pin cards. Dell offers several GPU installation kits for the R750 keyed to the specific GPU model, so the right kit part number depends on which card you're installing — check the kit matched to your GPU before ordering. [community thread]

How do I replace the HBA355i with the H745 RAID controller in a PowerEdge R6525?

Begin by performing a full backup, as the drive configurations may change when switching controllers. The cabling is generally the same, but it's advisable to verify specific configurations. The part number for the H745 RAID controller is JT47Y. [community thread]