Part number K5M1N
Request a quote
SAS Cable Dell PowerEdge R660/R6615/R6625 8x2.5"/10x2.5" 1xSFF-8654 R/A 8i CTRL_SRC_SB1 for 1xSFF-8654 STR 4i BP_DST_SB1
| ism to | BP_DST_SB1 |
|---|---|
| ism from | CTRL_SRC_SB1 |
| topology | sas_straight |
| component type | cable |
| ism endpoint source | mig_306_quick_wins_2026-05-18 |
Configure a complete server with live pricing
The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]
To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]
No, the H755 SAS controller is not compatible with NVMe drives, even if the backplane supports them. You will need to use a dedicated NVMe controller for this configuration. [community thread]