Dell Card BOSS-S1 Dell PowerEdge R450/R650xs/R660xs/C6620 PCIe

Part number MJK9R

Request a quote

Card BOSS-S1 Dell PowerEdge R450/R650xs/R660xs/C6620 PCIe 3.0x4 2x M.2 2280 6GB SATA Modularna

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What should I do if my Dell R450 shows HWC8010 and UEFI0459 errors during startup?

To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]

What cables are needed for an H755N Front NVMe RAID card in a PowerEdge R650xs server?

The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]

How can I resolve issues with Layer 1 connectivity on a PowerEdge C6620 using Dell SFP28 and Cisco SFP+ transceivers?

Ensure that the system firmware, including CPLD, BIOS, and iDRAC, is fully updated. You may also want to drain flea power by disconnecting all power and network cables, holding the power button for 20 seconds, and then waiting for 3 minutes before reconnecting. Additionally, check the BIOS settings to disable 1Gb options on the OCP NIC, leaving only 10Gb and 25Gb enabled. [community thread]

How can I resolve the issue of my 2Rx4 memory being detected as Quad Rank?

To address this issue, ensure that your DIMMs are properly populated according to the server's memory guidelines. Check the BIOS version and verify the specifications of the installed DIMMs, as only certain capacities are supported for 2R DIMMs. [community thread]

What is the part number for the riser card compatible with the R660 server for a full height SAS card?

The appropriate riser card for the R660 server that supports a full height SAS card is part number 540-BFFR. This riser configuration includes 2x16 FH slots and is designed for customer installation. [community thread]