Part number PFHYD
Request a quote
Cable MCIO Dell PowerEdge R760/R7625 1xSFF-TA-1016 STR 38P MB_BOSS for 1xSFF-TA-1016 STR 38P CTRL_DST_PA1
| component type | cable |
|---|
Configure a complete server with live pricing
This error is typically associated with issues in the motherboard's voltage regulation or CPU seating. To troubleshoot, perform a power drain, check for firmware updates, and inspect the CPU for any bent pins or debris. If the problem continues, the motherboard may need to be examined. [community thread]
Yes, the R760 server with dual CPUs can accommodate two Nvidia L40 GPUs, as they are double-width and within the power specifications. Ensure you have a power supply of at least 1600W and the appropriate GPU riser kit, power cables, and cooling components for optimal performance. [community thread]
The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]
To acquire the GPU installation kit for the PowerEdge R7625, it is recommended to contact the customer support hotline for a quote tailored to your system. The installation cable kit number is typically 06KX6, which includes specific cables such as 0M6CK, GPN9K, 0DK9Y, and MD9J9. [community thread]
To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]