Lenovo ThinkSystem M.2 5300 480GB SATA 6Gbps Non-Hot Swap SSD

Part number 02JG529

Price: $560.00 USD

ThinkSystem M.2 5300 480GB SATA 6Gbps Non-Hot Swap SSD

Specifications

interfaceSATA
pair price400.0
capacity gb480
form factorM.2

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

How can I enable TPM on a Lenovo SR650 running ESXi 7.0 without disrupting my current setup?

To enable TPM on your Lenovo SR650, refer to the technical documentation available at Lenovo's website, which provides guidance on configuring TPM with VMware environments. Ensure to follow the steps carefully to minimize any potential impact on your existing system. [community thread]

How can I configure RAID 1 with NVMe drives on the SR650 V2 server?

Ensure you have the appropriate NVMe RAID FoD license, as only Intel-branded NVMe SSDs are supported for RAID configurations. Additionally, verify that you are using Lenovo-qualified NVMe drives for compatibility and consider updating your firmware with the latest Lenovo Bootable Media Creator ISO. [community thread]

What should I do if my Lenovo ThinkSystem V2 server reports a low CMOS battery during operation?

If your server indicates a low CMOS battery, it is necessary to replace the battery. Additionally, updating the firmware may help enhance battery performance. [community thread]

What should I do if my server is not recognizing all installed NVMe drives?

First, verify that the NVMe drives in the affected bays are properly seated and connected. Restarting the XClarity Controller (XCC) may also help restore the drive inventory. Additionally, ensure that your server's firmware is up to date and check the VMD settings in the BIOS/UEFI for correct configuration. [community thread]

What can I do if my ThinkSystem SR630 V2 has slow disk speeds?

If you're experiencing low write speeds of 15-20 MBps, this may be expected due to the cacheless nature of the 5350 controller, which operates in write-through mode. To potentially improve performance, you can enable the drive cache using the MegaRAID BIOS interface or storcli commands. For significant speed enhancements, consider upgrading to a controller with a cache module. [community thread]