Dell Standard 1U Heatsink for Dell Emc PowerEdge R450

Part number 0VH8RK

Price: $138.60 USD

DELL STANDARD 1U HEATSINK FOR DELL EMC POWEREDGE R450 / R650 / R650XS / R750 - STD SCREW DOWN TYPE + ( ASSY, HTSNK, STD, 1U, R750/650 ) ( MOD, THRM, CPU, STD, 1U, R650/750 )

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What should I do if my Dell R450 shows HWC8010 and UEFI0459 errors during startup?

To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]

What parts are needed to install a GPU on a PowerEdge R750XS server?

The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]

Why isn't a second CPU recognized after reinstalling it in a PowerEdge R750?

This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]

What NIC card and DVD/RW drive are compatible with the R550 server?

Both a NIC card and a built-in DVD/RW drive can be used with the R550. To ensure compatibility, check the Dell Support page with your server's service tag for a list of supported hardware, or refer to the official specification sheet for detailed options. [community thread]

How can I identify and replace a failed drive in a PowerEdge R540 or R550 server?

To identify the failed drive, collect a Technical Support Report (TSR) that includes storage logs, which can provide insights into the drive's status. If the drive rebuild process is unsuccessful, you can replace the drive by following the hot-swapping procedure, ensuring to verify the correct drive using the server management interface. [community thread]