Part number 0X7K8W
Price: $14.00 USD
DELL 3.5" hdd tray caddy for POWEREDGE SERVER R740 R740xd R7415 R940 R640
Configure a complete server with live pricing
To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]
For specific pinout details of the 04VPD3 GPU power cable, it is recommended to contact the sales department or a third-party vendor directly, as this information is not typically available in public forums. [community thread]
The 0W0DNK NVMe expanders are not compatible with the 0P1MJ3 backplane. You should use the 0235NK expanders, as they are specifically designed for this configuration, allowing for optimal performance with 12 NVMe drives. [community thread]
To resolve the boot issue, revert the PERC controller back to RAID mode via iDRAC and perform a cold power cycle for 30 to 60 seconds. After rebooting, access the System Setup to delete any old UEFI boot entries, clear all configurations in the PERC settings, and ensure that your BIOS, iDRAC, and PERC firmware are updated before switching back to HBA mode. [community thread]
The Dell R740XD chassis does not support NVMe drives in a 12 + 4 configuration, which means there is no available option to add NVMe capabilities to this server model. [community thread]