Dell Fan Dell PowerEdge R7525/R750/R750XA/R750XS High

Part number 38HNJ

Request a quote

Fan Dell PowerEdge R7525/R750/R750XA/R750XS High Performance Silver Grade Single-Rotor F2R Normal Flow

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What GPUs are compatible with the PowerEdge R7525 and what is the maximum power draw?

For compatible GPUs and recommended slots, consult the technical guide, specifically page 27. The maximum power draw for GPUs is detailed in the table on page 7. [community thread]

What parts are needed to install a GPU on a PowerEdge R750XS server?

The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]

What should I do if my Dell R7525 server gets stuck at the IDRAC initializing screen with solid DS0 and DS3 LED lights?

First, ensure that the CPUs and memory modules are properly seated and compatible. Clear the NVRAM by using the onboard jumper or removing the battery to reset the BIOS settings. If the issue persists, it may indicate a fault with the motherboard. [community thread]

What should I do if I encounter a memory error when installing RAM in a Dell PowerEdge R750xs server?

If you receive a memory error, try rearranging the RAM modules to different slots, as one of the DIMMs may be faulty. Additionally, ensure that your BIOS and iDRAC are updated to the latest versions, as this can sometimes resolve compatibility issues. [community thread]

Why isn't a second CPU recognized after reinstalling it in a PowerEdge R750?

This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]